Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
dados de dispositivos de processamento - HP 4400 Dual Controller Enterprise Virtual Array w/Embedded Switch (261.95 kb)
Facilidade de uso
• When setting the Failsafe on link-down/power-up feature, if the feature is supported on the source
DR group but not on the destination DR group, the feature would be prevented from being used
on the source DR group. The fix allows this feature to be set or cleared on the source DR group
even if the destination DR group does not support it.
• The destination member’s world wide LUN IDs were not being changed to unique world wide
LUN IDs. If you recreate this DR group with the same source members, the destination members
would have the same world wide LUN IDs of the existing volumes. The duplicate naming would
prevent the LUNs from being presented on the destination array. Now, if you delete a DR group
that still contains members, the world wide LUN IDs will be changed to new unique world wide
LUN IDs.
• In HP Continuous Access EVA configurations, frame loss on the intersite link could result in a tunnel
stuck timeout due to an error in the exchange retry code. This issue only applies to XCS 09500000
or later.
• For an EVA controller pair running a DR consistency group, one of the destination controllers re-
boots, thus temporarily stopping the data mirroring relationship between the local controllers.
Upon rebooting, the mirroring relationship of the controllers for the DR group is restored, but in
the process, sometimes terminates with SCID_CA_BAD_PROXY_WRITE_STATE. The fix ensures
that the write back cache is synchronized before writes are processed.
• Fixed an issue where a DR group log expansion could potentially create non–contiguous metadata,
leading to a possible data unavailable condition.
Operating system/solution support
This section describes issues affecting EVA support of operating systems or solutions.
• Corrected erroneous test failures that occurred during Microsoft Windows 2008 Cluster Validation
Testing (CVT).
• An issue of host port connectivity instability, which caused a Windows host to lose access from
one path to a LUN, has been fixed.
• In a server-based management configuration, HP Command View EVA was unable to manage
the EVA4400 because LUN 0 was not accessible (this did not affect host I/O). The fix ensures
that LUN 0 remains accessible.
Upgrades (controller software, I/O module firmware, disk drive firmware)
This section describes issues affecting upgrades involving controller software, I/O module firmware,
or disk drive firmware.
• Improved reconstruction of a disk drive that failed during a firmware download.
• A correction was made so that the combination of a mirrorclone and a controller software upgrade
does not cause the controller to hang.
• Improvements were made to the I/O module firmware upgrade process to ensure port status is
reported consistently on both controllers.
• Corrected a timing issue so that when a disk drive had a firmware upgrade and a cache incon-
sistency occur simultaneously, the cache inconsistency is fixed and then the firmware upgrade
occurs.
• After a controller software upgrade, a resynchronization for an Error Detection Code (EDC) invalid
condition was falsely logged as a termination (termination code 0x0478393f). The controller
software was changed so the resynchronization does not occur for an EDC invalid condition.
For information about issues fixed in previous 095xxxxx releases, see the HP StorageWorks Enterprise
Virtual Array release notes (XCS 09522000), which are available at:
http://www.hp.com/support/manuals
6
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP 4400 Dual Controller Enterprise Virtual Array (173.83 kb)
dados de dispositivos de processamento - HP EVA6400 Array (173.83 kb)
dados de dispositivos de processamento - HP EVA6400 for Storage Centric Rack (173.83 kb)
dados de dispositivos de processamento - HP EVA8400 Array (173.83 kb)