• Do not use the appliance with wet hands, on a damp floor or when the appliance itself is wet. • Do not touch the plug with wet or damp hands. • Check the cord and the plug regularly for any possible damage. If the cord or plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard. • Do not use the appliance if it is dropped or otherwise damaged or if the cord or plug are damaged. In the case of damage, take the appliance to an electrical repair sh

• When using for the first time, soft scents or smokes may occur. This situation is not of big concern and stops after a little while. Take care of full ventilation capabilities. • Push downwards the sealing of the water filling hole (12). • Fill in the pipe water through the water filling hole (12) till it reaches the mark MAX (9) of the water holder (6). If water hardness exceeds 17 dH, use exclusively distilled water. Ask your supplier about the water hardness. Never use chemically unhardened

• Turn the steam/spray button (1) into position and blast out steam several times by pressing the steam/spray button. • When all the steam has escaped, the iron is ready to operate. OPERATION Dry Ironing • Fill the water tank as described below in Before First Use. For dry ironing, the water tank does not need to be filled with water. • To dry iron, set the steam selection switch to position 0. • Connect the power plug to a suitable socket and turn the temperature regulator clockwise to the desi

• Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned. • Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket. • Switch the appliance off before disconnecting from the mains. • Never use the cord to carry the appliance. 7 8 GB GBGB SPECIAL SAFETY INSTRUCTIONS • Burn hazard! The iron base is escapes while steam • Make sure to unplug • Turn off and unplug the appliance • After usin