9.8 10.8 11.4 17.0 12.7 5.9 MIN. WIRE AMPACITY 13.0 14.5 20.0 21.7 16.0 15.0 MAX. HACR BREAKER . 20 20 30 30 25 15 COMPRESSOR DATA RLA 8.8 9.8 11.4 15.2 10.9 4.7 LRA 49 60 75 96 70 33 FAN DATA DIAMETER 18 INCH / 3 BLADE 18 INCH / 3 BLADE 18 INCH / 3 BLADE 18 INCH / 3 BLADE MOTOR TYPE PSC PSC PSC PSC HP (W) / FLA 1/6 / 1.0 1/6 / 1.0 1/6 / 1.0 1/6 / 1.0 1/4 / 1.2 RPM 1075 1075 1075 1075 CFM 1800 1800 1800 1800 OUTDOOR COIL TYPE ENHANCED ALUMINUM PLATE FIN / RIFLED COPPER TUBE FACE AREA 8.0 8.0 8.0

2004 Antari Lighting and Effects Ltd. User Manual Antari Fog Cooler Congratulations on the purchase of your new ANTARI FOG COOLER Introduction Thank you for choosing the ANTARI Fog Cooler. You now own a rugged and powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Fog Cooler for years to come. Please fol

The smallest Aprilaire Humidifier under most operating conditions, has this humidifying capacity. Trouble-free performance and minimum maintenance are assured by the design features of the Aprilaire Humidifier. All unit housing parts that come in contact with water are non-metal and will never rust or corrode. Neither heat nor water will affect them under normal operating conditions. The Water Panel evaporator, designed especially for uniform, high evaporation, along with the Scale Control Inser

9. Reinstall the water panel evaporator assembly into the humidifier. Take care not to over- bend the water level sensor assembly. Push the top of the water panel evaporator assembly firmly back until it snaps into place. 10. Push the end of the feed tube back firmly into the distribution tray. Reset the damper to desired position. Replace the front cover. 11. Turn on the water supply. 12. Check system operation: Humidifier Control: (Automatic or Manual) Check system operation and reset change w

PERIODIC PREVENTATIVE MAINTENANCE NOTE: Periodic inspection and preventive maintenance of your total heating system is important for efficient and safe operation. Your heating contractor should include humidifier service at the same time. All models are equipped with an in-line water strainer and orifice as shown below. These parts should be inspected and cleaned periodically to assure continued proper unit performance. INSPECTION AND SERVICE INSTRUCTIONS IN-LINE STRAINER 1. Disconnect electrica

Do not use product if cord has been damaged. 2. Always place humidifier on a firm, flat; level surface. Keep cord away from heated surfaces and out of the way, where it cannot be stepped on or tripped over. 3. Do not place the humidifier directly on wood furniture or other surfaces that could be damaged by water. Protect by placing the humidifier on a non-metallic waterproof surface. 4. Do not place in direct sunlight, high-temperature areas, or near computers or sensitive electronic equipme