Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
4. Remove the spring securing the filter by pressing on its sides. 5. Lift the filter out. 6. Wash the filter in hot water and washing-up liquid or in the dishwasher. The filter may become discoloured if cleaned in the dishwasher. This will not impair its effectiveness. 18 7. Assemble the filter, spring and top cabinet in reverse order. The filter must be completely dry before it is re-fitted in the extractor. 8. Reset the filter cleaning indicator by pressing < and A simultaneously for 3 seconds. "CL" will disappear from the display. If you clean the filter before the table- mounted cooker hood has been in use for 30 hours ("CL" has not appeared on the display), the filter cleaning indicator can be reset in the same way. If there is a power cut, the filter indicator will be reset automatically. Extraction shaft Wipe the extraction shaft with a damp cloth and washing-up liquid or universal cleaner. Unpacking Check that the appliance has no faults and is undamaged on delivery. Transport Damages Any damages resulting from a transport which you have not performed yourself must be communicated to the dealer within one week of receipt of the product. On the rating plate which is placed on the back of the product you will find the CE marking and the product’s serial number. Write the serial number on the front of present instruction book so it is easily accessible in the event of service. Removal of Packaging All packaging can be recycled. Contact your local authority if you do not know where to dispose of the packaging. 20 Technical Data Model FM 2500DD-a: Product dimensions: Width: 180 mm Depth: 520 mm Height: 600 mm Installation dimensions: Width: 160 mm Depth: 490 mm Height: 647 mm Extraction rate: Level 1 150 m./h Level 2 220 m./h Level 3 345 m./h Intensive extraction 480 m./h Extraction rate: Total output: 310 W Exhaust connection: Round pipe or hose: O 120 mm 21 Installation Electrical Installation Installation must be carried out by an authorised electrician or by a person authorised by the manufacturer. Work carried out by unqualified persons can lead to personal injury and/or damage to property and may spoil thedowndraught extractor. During installation make sure the cable is not pinched. Do not interfere with the electrical components of the downdraught extractor. The exhaust air must not be connected to a duct that is already used to carry flue gasses away from an oil-fired boiler or similar appliances. The exhaust hose must not be connected to a chimney or the like that is used to carry flue gasses away from a boiler, wood- burning stove, fireplace, etc. 22 Connection Min. cable size: 0.75 mm. Cable type: HO5VV-F Installation must comply with any special requirements laid down by the local energy provider. The product must be connected via an external switch that disconnects all poles with a contact gap of at least 3 mm. (May be the main switch). Exhaust connection Exhaust connection: The connecting piece for the hose or pipe has a diameter of 120 mm. The exhaust hose must be at least 1 m long. Make sure that the connection is completely airtight. The cooker hood must be connected to an exhaust hose or pipe. It is vital that this connection is made for reasons of safety, and the cooker hood must not be connected to the power supply before the exhaust hose/pipe has been connected. If the outlet is in a wall, it must be fitted with a grille or the like. PE L L2 L1 N N 23 Installation beside a gas appliance If the downdraught extractor is installed beside a gas appliance, it must only be operated in top position and extract from the other side, i.e. the damper closest to the gas appliance must be closed permanently. This can be done as follows: 1. Modifying the electronic control system On the PCB cut the jumper labelled "JP01". The downdraught extractor can now only be operated in top position. 2. Removing a damper To be able to mount the cover plate, the damper has to be removed as follows: 1. Switch the downdraught extractor on and raise it to top position. 2. Lift the top cabinet off. 3. Turn the top cabinet upside down and put it on a soft base. Take care not to scratch the glass on the top. 4. Remove the two screws holding the damper and the single screw holding the activation arm that closes the damper. The damper can now be removed. 24 3. Fitting the cover plate Fit the cover plate as follows: 1. Position the cover plate against the glass on the top cabinet. 2. Position the cover plate against the top cabinet. 3. Mark the four holes on the top cabinet, using the cover plate as a template. 4. Remove the cover p...
Este manual também é adequado para os modelos :Fans - FM 2500DD-A (413.43 kb)
Fans - FM 2500DD-A (413.43 kb)
Fans - FM 2500DD-A (413.43 kb)
Fans - FM 2500DD-A (413.43 kb)