All Rights Reserved. Copyright © 2003: Clarion Co., Ltd. Printed in Japan/ Imprime en Japon / Impreso en Japon QC-6810B 2003/1 (D·K) 280-7897-01 Thank you for purchasing the Clarion VRX935VD. . This owner’s manual is for the VRX935VD. . Please read this owner’s manual in its entirety before operating this equipment. . After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). . Check the contents of the enclosed warranty card and keep it carefully with this manual.

Low-pass crossover filter with selectable frequency control 60Hz or 90Hz. Three stereo RCA outputs to drive front, rear and subwoofer audio systems. Auxiliary stereo RCA inputs with adjustable gain control. Separate controls for master system volume, subwoofer volume, front/rear fader and selection of main or auxiliary inputs. For optimum performance, the EQS744 should be installed by an authorized Clarion dealer. ABOUT THE MANUAL AND WARRANTY To start enjoying your new Clarion EQS744, please re

This is the default setting. 3. Select a frequency on the Plug and Play receiver using the FM Transmitter option. For more information, see the Plug and Play Receiver User’s Guide. 4. Set your car radio to the same frequency. 4. Install the cradle You can mount the cradle directly to the dashboard or another flat surface or you may mount it using the mounting base in this kit. 1. Locate a firm, reasonably flat surface within your vehicle to permit optimum viewing and line-of-sight access by the

LTD. 1998 All Rights Reserved Precautions IMPORTANT: READ THE INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USING THE CLARION AUTOPC SYSTEM. SAFETY WARNING! When you see this symbol !, it means, for your safety, the vehicle must be stopped to set or use the Auto PC. Pull over in a safe and legal manner before attempting to manually access a function of the system. Read and follow instructions Before using your Windows® CE for the Auto PC system, read and follow all instructions and safety informa

Repeat play The repeat play continuously plays the current track. This function continues automatically until it is canceled. 1. Press RPT button 6. “RPT ” lights in the display and the current track is repeated. 2. To cancel the repeat play, press RPT button 6 again. “RPT ” goes off from the display and normal play resumes. Random play The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is canceled. 1. Press RDM bu

Veuillez deployer et vous referer a la page suivante. Cerciorese de desplegar y de leer la pagina siguiente. XA311 n Contents English 1. FEATURES.................................................................. 2 2. CONTROLS................................................................. 3 3. CASSETTE PRECAUTIONS AND CARE .................. 4 4. BUTTON TERMINOLOGY.......................................... 5 5. OPERATION................................................................ 6 6. TROUB

The advantage to using this type of amplifier is in the low current consumption of the amplifier at high power levels. The class "D" amplifier provided with this system will produce a rated 100W into a 2 ohm load. The woofer supplied with this system uses a voice coil with rated impedance of 2 ohms, and therefore is not considered a standard woofer. Replacing the woofer with any driver having an impedance greater than 2 ohms will yield lower power output from the amplifier, and is not recommende

Water may dam age the internal circuitry. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 41° - 104° F.) muaisiuiiiuziu • In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark, but this is not a malfunction. The set will work normally once the temperature inc