1). Close off the unused hole using the bayonet fitting caps D. • Warning! If is decided to use the rear outlet hole B, first remove the sponge E that closes that hole. Fig. 2. Fig. 1 Filter Version • The air is filtered and recirculated through the front grid. • Move the lever G to position F - Fig. 3. • You will need an original AEG KF14 charcoal filter for the filtering function. (See Special Accessories). Fig. 2 Fig. 3 Using the cooker hood The control panel • The hood is fitted with one mot

2) Move the lever F to position A — Fig. 3. When connecting up the hood using a telescopic wall pipe, you should preferably using the uninflammable outlet hose No. E 610 899 007 (120 mm 0) from our range of special accessories. Extractor version 23 Filter version The air is filtered and recirculated through the front grille. You will need an original AEG KLF60/80 activated carbon filter for filtering function. (See special accessories). 24 Electrical connections Check that the power

— Fig. 4. B~] 10 Wall mounting • Fix the drilling template to the wall. • Make 3 0 8mm holes in the wall 2 at points I, 1 as desired at points L. • Insert the three 0 8mm expansion plugs into the wall. • Insert 2 5x45 screws at points I but do not tighten them completely. • Adjust the unit so that it is positioned at a right angle to the wall by turning the two support screws G. • Fit the hood into holes I, tighten the 2 screws. • From inside the hood, insert the third 5x45 screw into

An isolating device is to be provided on the fixed wiring side. Switches with a contact opening of more than 3mm apply as isolating devices. These include-automatic cut-out switches, fuses and contactors (VDE0730, s. 7, Parti). 10 Your appliance must be connected to fixed wiring via the use of a double pole swiched fused spur outlet with or without pilot lamp. We strongly recommend the appliance is connected by a qualified electrician who is a member of the NICEIC who will comply with the I

For those hoods that do not come with a charcoal filter, it is available as an accessory. Filters. Long-life charcoal filter. This charcoal filter is used in recirculation mode to remove cooking smells. It may be washed in the dishwasher and dried in the oven. Charcoal filter. This charcoal filter is used in recirculation mode to remove cooking smells. Needs periodically. Metal grease filters. The metal filter attracts the grease from cooking vapours, reducing odours, purifying the air and optim

The cleaner the filters, the more grease they collect. Remove the filters by (Fig. 3): l Push the handle towards the rear of the hood. l Pull the filter down at the front and remove it forwards. The filter is made of aluminium wires on which the grease collects. Clean the filter in hot water using a detergent, or in a dishwasher. Let the filter dry before putting it back. Note that a dishwasher may discolour the filter. Changing and cleaning the carbon filter Only applicable for recirculation. T

6 Control Panel - 8360 D - 8390 D - 8361 D - 8391 D .......................... 7 Maintenance and care ...................................................................... 8 Cleaning the hood .............................................................................. 8 Metal grease filter ............................................................................... 8 Removing the metal grease filter ........................................................ 8 Charcoal filter ................

Fig. 2. • Optionally, the position of the chimney elements can be changed. When using the hood in the filter version the chimney must be fixed at the top, with the air outlet grill at the side. Fig. 1 Fig. 2 Description of the Appliance • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter. • You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre). Extractor version •