Assessments - 3, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
.page 30 The default setting is mass storage. Before connecting the USB cable, check if the appropriate USB mode you want to use is selected. • • USB Connect Connect the memory camcorder to a PC via a USB 2.0 cable and you can transfer your movie images from the storage media, or use this camcorder as a webcam. settingscontentson-screendisplay"Mass Storage"Transfers the data files with your memory camcorder and a PC. .page 75 None "PC Cam" Uses your memory camcorder as a webcam. .page 76 None on-screendisplayNone None Default Set You can initialize the memory camcorder settings to the factory defaults(initial settings at the factory). Initializing the memory camcorder settings to factory defaults does not affect recorded images. After resetting the memory camcorder, set "Date/Time Set". .page 31 settingscontents"Off"Disables the function "On" Activates demonstration mode and shows various features on the LCD screen. -After it exit to the menu, the demonstration is automatically operated. -Demonstration mode will resume if you operate any other function in STBY mode for about 6minute. "Auto Power Off"function does not operate during the demonstration mode. 68_English USB interface This chapter explains how to connect a PC using the USB cable for various actions. -To connect an USB cable to a PC, refer to the software installation instructions and available PC specification. SYSTEM REQUIREMENTS Transferring a Digital Image through a USB Connection The memory camcorder supports USB 2.0 High speed. (Depends on the PC specification) You can transfer a recorded file in storage media to a PC via a USB connection. If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the memory camcorder. USB Connection Speed (depending on the System) High speed USB connection is supported by Microsoft (Windows) device drivers only. Windows 2000 -High speed USB on a system with Service Pack 4 or later installed. Windows XP -High speed USB on a system with Service Pack 1 or later installed. Windows Vista -High speed USB on a system with Service Pack 1 or later installed. System Requirements Windows operating systems CPU: Intel® Pentium 4™, 2GHz or higher, or the equivalent Operating systems: Windows® 2000/XP/Vista Standard installation is required. If you have upgraded your current operating system, we can not guarantee the proper operation of the product. Memory: 512MB RAM or higher Hard Disk: 2GB or higher Resolution: 1024x768 dots, 24bit colour USB port: USB2.0 High Speed -System requirements mentioned above are recommendations. Even on a system that satisfies the requirements may not ensure the operation depending on the system. -This memory camcorder is recognised as a removable storage device on the Macintosh computer. (Mac OS 10.3 or above supporting the High Speed USB standards) English _69 USB interface On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time. On a slower PC than recommended, movie playback may skip frames or operate unexpectedly. If your OS is Windows 2000/XP/Vista, log in as the Administrator (administrator of the PC) (or a user with the equivalent privileges) to install the software. Check out the storage media of the memory camcorder before connecting USB cable. If no memory card or an unformatted memory card is inserted, the PC will not recognize your memory camcorder as a removable disk. If you disconnect the USB cable from the PC or the memory camcorder during the data transfer, the data transfer will stop and the data may be damaged. If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly. If this occurs, remove all other USB devices and try the connection again. Intel® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation. Windows® is a registered trademark of the Microsoft® Corporation. All other brands and names are property of their respective owners. 70_English INSTALLING THE SOFTWARE You need to install DV Media Pro to play back recorded movie files from memory camcorder with the USB cable on your PC. When you install the DV Media Pro software on your Windows computer, you can enjoy the following operations by connecting your memory camcorder to your computer via a USB cable. -View movie recordings on PC: DV Driver - DirectX9.0 - Video Codec-Webcam/USB streaming function: DV Driver - DirectX9.0 - Video CodecInstalling DV Media Pro Programme Before you start! Turn on your PC. Exit all other applications running. Insert the provided CD into the CD-ROM drive. -The setup screen appears automatically soon after the CD was inserted. If the setup screen does not appear, click on "Start" on the bottom left corner and select "Run" to display a dialog. Type "D:\autorun.exe" and then press ENTER, if your CD-ROM drive is mapped to "D:Drive". Installing Driver -DV Driver and DirectX 9.0 • DV Driver is a ...
Este manual também é adequado para os modelos :Câmaras de vídeo - VP-MX10 (4.97 mb)
Câmaras de vídeo - VP-MX10A (4.97 mb)
Câmaras de vídeo - VP-MX10AH (4.97 mb)
Câmaras de vídeo - VP-MX10AU (4.97 mb)