Your Compound Miter Saw has been shipped completely assembled except for the blade, miter lock handle, and dust guide. WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. • Remove all loose parts from the carton. Separate and check with the list of loose parts. See Figure 2. • Remove the packing materials from around your saw. • Carefully lift saw from the carton and place it on a lev

If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. n Do not dispose of batteries in a fire. The cell may explode. Batteries should be recycled, consult your local waste authority for information regarding available recycling and/or disposal options. n When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection fr

• To reduce the risk of electrical shock, this unit has a polarized plug (one blade is wider than the other). This unit will fit with a polarized plug in one way only. If the plug does not fit fully into the unit, reverse the plug. If it still does not fit, use a cord with the correct connection. Do not modify the unit in any way. To reduce the risk of WARNING: electrical shock, use only SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A cord types. 5 RULES FOR SAFE OPERATION RULES FOR

RED CHOKE LEVER squeezedunless the safety trigger is depressed. 18. BAR RETAINING NUTS 17. RED CHOKE LEVER aids in starting the engine. 19. THROTTLE / TRIGGER 19. THROTTLE TRIGGER controls engine speed. 20. CHAIN CATCHER 20. CHAIN CATCHER reduces the danger of injury in 21. CHAIN BRAKE r COVER the event saw chain breaks or derauls during oper 22. MULTI-PURPOSE TOOL ation. The chain catcher is designed to intercept a 23. CARRY CASE KICKBACKSPECiFiCS WARNING: K okbaokoanto head dangerous ioss of c

1. Push STOP switch up. 2. Remove top Cover. Disconnect the wire connector from the spark plug by pulling and twisting at the same time (Fig. 35). 3. Remove spark plug with spark plug socket wrench. DO NOT USE ANY OTHER TOOL. Do not sand blast, WARNING: scrape or clean electrodes. Grit in the engine could damage the cylinder. 4. Check electrode gaps with wire feeler gauge and set gaps to .025” (.635mm) if necessary. 5. Reinstall a new spark plug (champion RDJ8J or equivalent). NOTE: A resistor s

i...........22 Starting......................................................................... 11 Spark Arrestor Screen..................................................... 20 Storage ........................................................................ 27 Starter Rope.................................................................... 23 F Starting ............................................................................ 11 Fuel Filter....................................................

Compare the illustrations with your unit to familiarize yourself with the Iocation of the various controts and adjustments. Save this manual for future reference, Front Hand Guard Front Handle Starter Rope ON/STOP Switch Choke! Chain Muffler Lever CRAFTSMAN° Bar Bar Oil Fill Cap Sprocket Hole Starter Housing Fuel Mix Fill Cap Primer BuSb Cylinder Cover Chain Chain Throttle Lockout Direction of Travet Rear Handle CRAFTSMRN ° Guide Bar Throttle Clutch Cover Bar Catcher Trigger Adjusting Wheel Knob

358.351810 -18 in. Bar • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol, p, 27 CRAFTSMAN° Read and follow all Safety Rules and Operating WARNING: Instructions before first use of this product. For answers pm,to your Sun,about this product:pm Call 7 am-7 Mon-Sat;questions 10 am-7 • 1-800-235-5878

ASSEMBLY Your saw is fully assembled; no assembly is necessary. KNOWYOURSAW READTHISMANUALRULESBEFOREOPERAT OPERATOR'SANDSAFETY ING YOUR CHAIN SAW, Compare the illustrations with your unit to familiarize yourself withthe location of the various controls and adjustments. Save this manual for future reference. rToo, " Hand Guard.---_ A_._. Handle k S .or.ope "NL .1 t I.,I I_ /_._ switch Chain Muffler _ . Pdmer Bar Oil Fill Cap Housing Cylinder Cover Fast Idle AdjustingScrew Fuel Mix FillCap Chain

GUIDE BAR 2. SAW CHAIN 3. SAW CHAIN ADJUSTMENT SCREW 4. SPARK ARRESTER SCREEN 5. CHAIN BRAKE® LEVER /HAND GUARD 6. FRONT HANDLE 7. STARTER HANDLE 8. SPARK PLUG 9. AIR CLEANER COVER 10. STOP SWITCH 11. SAFETY TRIGGER 12. BAR OIL RESEVOIR CAP 13. STARTER COVER 14. FUEL TANK CAP 15. REAR HANDLE / BOOT LOOP 16. THROTTLE LATCH 17. RED CHOKE LEVER 18. BAR RETAINING NUTS 19. THROTTLE / TRIGGER 20. CHAIN CATCHER 21. CHAIN BRAKE® COVER 22. MULTI-PURPOSE TOOL 23. CARRY CASE SAFETY FEATURES 10. STOP SWITCH