Log:
Downloads : 0   Arquivo Tamanho: 353 kb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

ClutchCoverLowerHoleGuideBarAdjustingPin 12. Install bar nuts and finger tighten only. Once the chain is tensioned, you will need to tighten bar nuts. CHAIN TENSION (Including units with chain already installed) WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving. NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage. Checking the

Downloads : 7   Arquivo Tamanho: 1 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

315.212130 Save this manual for future reference • Safety _IL CAUTION: Read and follow • Features all Safety Rules and Operating • Adjustments Instructions before first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 • Parts List Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 0( us 972000-905 • Table of Contents ...................................................................................................................

Downloads : 11   Arquivo Tamanho: 6 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

Not low enough decreases cutting ability. . If cutter teeth have hit hard objects such as nails and stones, or have been abraded by mud or sand on the wood, have service dealer sharpen chain. NOTE: Inspect the drive sprocket for wear or damage when replacing the chain. If signs of wear or damage are present in the areas indicated, have the drive sprocket replaced by a Craftsman Service dealer. How to Sharpen the Cutters See Figures 33 - 34. Be careful to file all cutters to the specified angles

Downloads : 0   Arquivo Tamanho: 3 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

Always leave a hinge. The hinge guides the tree. If the trunk is completely cut through, control over the felling direction is lost. Before making the WARNING: final cut, always recheck the area for bystanders, animals or obstacles. Insert a wedge or felling lever in the cut well before the tree becomes unstable and starts to move. This will prevent the guidebar from binding in the felling cut if you have misjudged the falling direction. Make sure no bystanders have entered the range of the fall

Downloads : 0   Arquivo Tamanho: 3 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

Incredi-PuW M Starting Auto Rewind Muffler ........................................................................................................................................................... Baffled with Guard Throttle ..................................................................................................................................................... Manual Spring Return Fuel Tank Capacity ...................................................................................

Downloads : 61   Arquivo Tamanho: 7 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name@name

21. NOTE: Always wear heavy gloves when handling the saw chain. 1. Make sure the Chain Brake® lever is pulled back into the DISENGAGED position (Fig. 21). Remove bar retaining nuts with supplied multi-purpose tool (Fig. 22). 2. Remove chain brake cover (C, Fig. 22) and outer guide bar plate (I, Fig. 27) by pulling straight out (Fig. 22). 3. Slide bar off the two bar bolts and remove chain (Fig. 23). A Fig. 21 B C Fig. 22 Always use protective gloves when handling the saw chain. WARNING: 1. Sprea

Downloads : 56   Arquivo Tamanho: 3 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

-Sat. 7 a.m. -7 p.m. Sun. 10 a,m.-7 p.m. 3._ READ THE OPERATOR'S MANUAL AND FOLLOW ALL WARNINGS AND SAFETY INSTRUCTIONS. l_k WARNING: FAILURE TO DO SO CAN RESULT IN SERIOUS INJURY. Sears, Roebuck 530-083360-1-08/4/95 CRAFTSMRN" Always Wear Eye Protection CRRFTSMRN° 2.4 cu. in/40cc 2-CYCLE 2.4 cu. in/40cc 2-CYCLE 2.6 cu. in/42cc 2-CYCLE GASOLINE CHAIN SAW • Assembly • Operation • Customer Responsibilities • Service and Adjustments • Repair Parts and Co., Hoffman Estates, IL 60179 U.S.A. SAFETY RU

Downloads : 9   Arquivo Tamanho: 983 kb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

Bar • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol, p, 27 CRAFTSMAN° Read and follow all Safety Rules and Operating WARNING: Instructions before first use of this product. For answers to your questions about this product: Call 7 am-7 pm, Mon-Sat; Sun, 10 am-7 pm • 1-800-235-5878

Downloads : 0   Arquivo Tamanho: 983 kb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name

Burrs on drive links, which prevent them from entering the groove of the guide bar, can be removed with a flat rite. • Keep the chain out of dirt and sand. Even a smaII amount of dirt will dull a chain, increase the possibility of kickback, and require chain sharpening or replacement. • Practice cutting a few small logs using the following techniques to get the "feeF of using your saw before you begin a major sawing operation. • Squeeze the throttIe trigger and allow the engine to reach full spe

Downloads : 47   Arquivo Tamanho: 3 mb   Fabricante : McCulloch  
Categoria : Benzo e serras
@name@name

358.352680 -18 in. Bar @ Read and follow all Safety Rules and Operating WARNING: Instructions before first use of this product. For answers to your questions about this product: Call 7 am-7 pro, Mon-Sat; Sun, 10 am-7 pm 1-800-235-5878 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA 530-087030 07/0"_/97 Warranty Safety Rules 2 2 Storage Trouble Shooting Chart 16 17 Assembly 5 Parts List 19 Operation Maintenance 6 11 Spanish Parts & Ordering 22 Back Service and Adjustments 14 FULL ONE YEAR W





categorias