Ross Test Stamp This product meets Russian electronic safety approvals. FCC regulations NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm

3. Using the skip/scan buttons or the remote handset skip to the track number that you want to program as your first track. 4. Press Program. The desired track is now entered and the program number increases by one. 5. Repeat steps three and four until all your desired tracks are entered. 10 azur Compact Disc Player 6. Press Play. The programmed tracks will play. 7. You can use the skip and search functions to move through your programmed selection in the same way as normal playback. 8. Pressing

The result of this is the virtual elimination of the main causes of distortion in every digital audio set-up. 3. OPTICAL OUTPUT Use this socket to connect to the input of a separate DAC or digital recording machine. Use a high quality fibre optic interconnect cable designed specifically for audio use. 4. DIGITAL OUTPUT This coaxial output is for input to a separate DAC or digital recording machine. Use a high quality 75 ohm BNC interconnect cable for this connection (not one designed for normal

This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than Cambridge Audio or a 2 Cambridge Audio dealer, or authorised service agent which is authorised to do Cambridge Audio warranty work. Any unauthorised repairs will void this Warranty. This

Mute Mutes the audio on the amplifier. The Mute mode is indicated by the channel LED flashing. Press again to cancel mute. Aux, CD, Tuner DAB, DVD, AV MD, Tape Mon The six source select buttons are used to change the input source to the amplifier. 540C/640C V2.0 Compact disc player OPERATING INSTRUCTIONS Loading and unloading discs 1. Press the Standby/On switch. 2. Press the Open/Close button. 3. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing

azur 740C Upsampling compact disc player User’s manual 2 Upsampling CD-Player Bedienungsanleitung 12 Opsampling cd-afspiller Brugervejledning 62 Проигрыватель компакт-дисков с использованием повышенной дискретизации Руководство пользователя 72 в Cambridge Audio 0 Cambridge Audio Contents Introduction.................................................................................................2 Limited warranty........................................................................

No other discs can be used. Any CD-R/CD-RW discs should contain properly recorded TOC (Table of Contents) information so that they can be played back. This unit can play only the discs recorded in the CD-DA format designed for music reproduction. Do not attempt to play a disc containing other data, such as a CD-ROM for PCs with mp3 or WMA files, on this unit. 1. Switch on your amplifier and set its input selector to the correct position. Adjust the volume control to a minimum. 2. Press the Open/

This unit must not be used near or exposed to dripping or splashing water or other liquids. No objects filled with liquid, such as vases, shall be placed on the unit. In the event, switch off immediately, disconnect from the mains supply and contact your dealer for advice. Ensure that small objects do not fall through any ventilation grille. If this happens, switch off immediately, disconnect from the mains supply and contact your dealer for advice. To turn the unit off completely switch off on

This means that you do not need to press the CD button to access CD30 control. Hold down the CD button whilst inserting the batteries to lock the remote to CD30 control mode. To restore the default mode, remove the batteries and allow five minutes before re-inserting them. Standby/On Switches the unit between Standby and On mode. 0-9 numeric buttons The functions of these buttons differ depending on source mode selected: Tuner (AR30/DR30) mode – Press to recall a preset. Press and hold to store

There is a new toroidal transformer for lower noise and less waveform distortion, a revised display (LCD) which offers two levels of brightness and a highly ergonomic navigator style remote handset. To allow seamless integration with multi-room entertainment systems, a Control Bus input and output have been fitted, as has an IR emitter input. A custom designed, acoustically damped chassis minimises resonance, ensuring sonic performance. Technological prowess doesn't detract from the model's