Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Replacing an AC Power Cord in a Power Shelf
No system shutdown is required to replace one AC power cord in a power shelf. All
components in the enclosure continue to receive power from the other power cord. No
tools are needed for this procedure.
Unpack and inspect the replacement power cord. If the power cord is damaged, you
need to order another one before continuing with this procedure.
Note: Before you remove a power cord, make sure the PIB-to-PIB crossover cable
is securely connected to both PIBs. This cable is necessary for power to be routed
from a single power supply to both sides of the enclosure. See Power Shelf Bulkhead
and Service Side of Power Shelf.
To remove a power cord:
1
Review the Notes page before beginning the replacement procedure.
2
Unplug the power cord from the AC outlet.
Note: In North America, the default AC power cords now have a twist-lock
plug on the end that connects to the AC receptacle.
3
Lift up the locking bar on the power cord retainer. See Connecting and
Disconnecting a Power Cord in a Power Shelf.
4
Remove the power cord connector from the retainer in the power shelf.
You are now ready to install the replacement AC power cord.
To install a power cord:
1
Orient the plug with the single contact on top, and insert the plug in the
retainer. See Connecting and Disconnecting a Power Cord in a Power Shelf
and AC Power Cord Installed in a Power Shelf. Fully seat the plug on the
power supply connector prongs. You might need to move the plug from left
to right and up and down to fully seat it.
Note: If the plug does not easily fit on the power supply connector,
unseat the power supply, install the plug in the retainer, and then reseat the
power supply.
...