7. Use the clamp assembly (10) to secure the workpiece wherever possible. 8. It is possible to remove the clamp assembly (10) by loosening the clamp assembly lock (11) and moving it to the other side of the table. Make sure the clamp assembly lock is tight before using the clamp (Fig. r). 9. Before turning on the saw, perform a dry run of the cutting operation to check that there are no problems. 10. Hold the operating handle (7) firmly and squeeze the switch trigger (24). Allow the blade to rea

These instructions contain information necessary for safe and effective operation of this product. This product has unique features. Even if you are familiar with similar products, please read this manual carefully to make sure you get the full benefit from them. Keep this manual close to hand and ensure all users of this tool have read and fully understand them. Guarantee To register your guarantee visit our web site at and enter your details*. Your details will be included on our mailing list

We recommend that you always wear a dust mask when operating this saw. • Wear gloves when handling saw blades and rough materials. • Saw blades shall be carried in a holder wherever possible. • Select saw blades in relation to the material being cut. • Use correctly sharpened saw blades and observe the maximum speed marked on the blade. • Take additional care when trenching (slotting). • The mitre saw can be safely carried by the carrying handle but only once it has been removed from the mains p

1200W VARIABLE SPEED SCROLL SAW WITH REDEYE ® LS1620 INSTRUCTION MANUAL BlackCyanMagentaYellowCode: LS1620Date: 060906Edition: 05Op: BRBlackCyanMagentaYellowCode: LS1620Date: 060906Edition: 05Op: BR ContentsContents Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 Safety rules for laser lights 4 General safety instructions 4 Additional safety rules for scroll saws 5 Accessories 6 Unpacking 6 Assembly 6 Know your product 7 Mounting the saw to a workbench 8 Blade

Jigsaw on/off trigger switch 3. Soft grip handle 4. Shoe plate 5. Lock-on button 6. Blade guard 7. Blade guide 8. Cutting angle scale 9. Parallel fence 10. Pendulum lever 11. Variable speed dial 12. Tool free blade change control 13. Dust extraction adaptor 14. Parallel guide fixing screw location 15. Laser aperture 16. Dust extraction adaptor port 17. Shoe lock 18. Blade storage 19. Blade storage release tab 7 11 1 2 5 3 15 6 12 14 7 84 18 17 10 16 9 13 19 Adjusting the shoe for angular cutting

INSTRUCTION MANUAL REDEYE® 250W 200mm Band Saw with Laser Line Generator • Melbourne • Perth • Auckland • Hong Kong • Shanghai LS8B • Taipei • New York • Verona • London • Paris 030710 MW ED7 Contents Contents Warranty 2 Introduction 3 Description of symbols 3 Specifications 3 Safety rules for laser lights 3 Safety instructions 4 Additional safety rules for band saws 5 Unpacking 6 Accessories 6 Know your product 7 Assembly 8 Upper blade guide adjustment 8 Lower blade guide adjustment 9 Housing d

General safety instructions 4 This product is warranted for a 2-year period for home Additional safety rules for band saws Unpacking Know your product Components Assembly 5 6 6 8 8 domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be repaired or replaced free of charge with another of the same item. A small freight charge may apply. Proof of purchase is essential. We reserve the right to reje

11400W TILE AND TRIM CIRCULAR SAW TTS5000M INSTRUCTION MANUAL BlackCyanMagentaYellowCode:TTS5000MDate: 070206Edition: 13Op: DCRBlackCyanMagentaYellowCode:TTS5000MDate: 070206Edition: 13Op: DCR ContentsContents Warranty 2 Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 General safety rules 4 Additional safety rules for laser lights 5 Additional safety rules when using water cooling system 6 Additional safety rules for tile and timber cutting saws 6 Testing your

INSTRUCTION MANUAL 2000W 250mm (10”) Table Saw with Laser Line Generator* * Patent Pending LS250TS 061004 ED8 DCR • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris 2 Contents ...................................................................................................................................................................................................................................................................................