Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4–5) These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2005 BOSS CORPORATION All rights rese

--- NAME --** ** 0D 00 00 00 00 01 20 - 7F Name 1 *Refer to "Table Name" ** ** 0D 01 00 00 00 01 20 - 7F Name 2 *Refer to "Table Name" : : : : : ** ** 0D 0F 00 00 00 01 20 - 7F Name 16 *Refer to "Table Name" --- ASSIGN 1 --** ** 0E 00 00 00 00 01 00 - 01 ASSIGN 1:On/Off 00 : Off 01 : On ** ** 0E 01 00 00 00 02 00 00 -ASSIGN 1:Target *Refer to "Table Target" ** ** 0E 02# - 01 7F ** ** 0E 03 00 00 00 02 xx xx -ASSIGN 1:Target Min [Target Param Min <= Data <= Target Param Max] ** ** 0E 04# - xx xx

The external MIDI device then switches its settings according to the Program Change message it receives. fig.10-01 Outputting Control Change Messages Data describing the actions of the CTL pedal, expression pedal, expression pedal switch, and external devices connected to the SUB EXP PEDAL/SUB CTL 1,2 jack are output as Control Change messages. Such messages can be used to (among other things) manipulate the parameters of an external MIDI device. MIDI Start/Stop, MMC Play/Stop MIDI Start/Stop or

• Before moving the unit, disconnect the AC adaptor and all cords coming from external devices. .................................................................................................. • Before cleaning the unit, turn off the power and unplug the AC adaptor from the outlet (p. 14 ). .................................................................................................. • Whenever you suspect the possibility of lightning in your area, disconnect the AC adaptor from the outlet

fig.00-100 3. Select the pad bank. For this example, press pad [5] to select USER BANK 1. 4. Press pad [5]. The sample will play. 5. Press [CHOP]. fig.00-29a 6. Use the VALUE dial to set the detail (RESOLUTION) at which the sample will be divided. Higher settings will cause the sample to be divided into a larger number of samples. 7. To execute the operation with the resolution level you specified in step 6, press [F1] (EXECUTE). To cancel, press [F2] (CANCEL). * If you press [F3] (CANCEL) while

A motion of the filter changes depending on the strength or the position, when playing the bass. DEEP FILTER A saw-wave synth-bass sound with a strong filter effect. A motion of the filter changes depending on the strength or the position, when playing the bass. SQUARE A square-wave synth-bass sound. A motion of the filter changes depending on the strength or the position, when playing the bass. * When SYNTH (SAW LEAD–SQUARE) is selected, this effect does not function correctly if two or more no

Copyright © 2006 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced written permission of BOSS CORPORATION. Main Features....................................................................................................... 4 Panel Descriptions .............................................................................................. 5 Connections....................................................................................................... 10 Turnin

ROOM This simulates the reverb sound of a smaller room. HALL This simulates the reverb sound of a larger hall. SPRING This simulates the sound of a guitar amp’s built-in spring reverb. MOD This is a reverb that adds modulation to the hall reverb to produce an extremely pleasant reverb sound. Using the Effects Using the Effects l PEDAL MODE Indicator You can make the setting that determines whether the ME50’ s expression pedal functions as a volume pedal or as an expression pedal. In addition, wh

These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Main Features . COSM Modeling faithfully creates the speaker characteristics, internal cabinet resonance, rotation speed adjustments, and other particular elements of the rotary

18; p. 21). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2001 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION