This bar will begin to flash when a track is ending regardless of which time function you are in. Use the flashing bar as a visual reminder that a track is ending. ©American Audio® - - CK 800Mp3 Instruction Manual Page 21 Pitch adjustments Pitch adjustments: You can activate the PITCH SLIDER (4) by pressing the PITCH ON/OFF BUTTON (5). When the button LED is lit, the PITCH SLIDER is active and the pitch can be adjusted. When the button LED is not lit PITCH SLIDER is not active. The different pit

Pressing the PLAY/PAUSE BUTTON (17) will switch between play and pause modes. When the unit is in pause mode the PAUSE INDICATOR (49) in the LCD DISPLAY (19) will glow. The green PLAY/PAUSE BUTTON (17) LED will also begin to flash repeatedly. 7. FRAME SEARCH This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue, sample, or loop point. To use the scroll function you must first be in Pause Mode (see section 5) or Cue Mode (see section 7). Onc

1. PLAYLIST - Normal / Title/ Artist / Album / Genre The DATABASE BUILDER can generate "Playlist" for USB device. You can adjust various criteria in order to filter tracks in this setting. You can turn the TRACK KNOB (21) or JOG WHEEL (16) to scroll through the different settings; " Normal / Title/ Artist / Album / Genre". See page 33 Playlist Operation. 2. REPEAT MODE - 3 different modes: Play All Repeat / Folder Repeat / Track Repeat 3. MIDI CH - Setup MIDI Channel from 1 to 16 (Deck A - Mixer

Q-SPAND PRO Featuring: User Guide and Reference Manual Q-SPAND PRO Featuring: User Guide and Reference Manual Q-SPAND PRO CONTENTS Q-SPAND PRO CONTENTS 2 ELECTRICAL PRECAUTIONS................................................................................................................4 SAFETY PRECAUTIONS........................................................................................................................5 INTRODUCTION..........................................................

Los Angeles Ca. 90040 1/08 Q-SD CONTENTS MAIN FEATURES....................................................................................................................................2 ELECTRICAL PRECAUTIONS................................................................................................................4 SAFETY PRECAUTIONS........................................................................................................................5 INTRODUCTION........................

Please write down the numbers here and retain for future reference. Model No._____________________________ Serial No._____________________________ Purchase Notes: Date of Purchase_______________________ Dealer Name__________________________ Dealer Address_________________________ _____________________________________ _____________________________________ Dealer Phone__________________________ WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN, LIQUIDS, OR MOISTURE

4. AUX CONTROLS - The AUX knobs control the signal level that the channel sends to AUX bus. 5. PRE/POST BUTTON - This button determines if the AUX signal is Pre Fader (signal level is not affected by fader position) or Post Fader (signnal level is affected by the fader position). 6. EFX CONTROL - These knobs control the signal levels sent to the EFX bus. The channel signals mixed by this bus have their overall level set by the MASTER EFX SEND control to the EFX jack located on the front top pane

You can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length of disc. You create a seamless loop between two continuous points of a disc. f-WT- s4me>Uca# “DO* РпапЬМппншпиш -^ A. ffi’œmoaoatiBQB 1) Press PLAY/PAUSE BUTTON (15) to activate playback mode Figure 19 -^ ааггжляввдв ж s'Baoomoarttk 2) Press the IN BUTTON (12). This will set the starting point of the SEAMLESS LOOP. The IN BUTTON (12)

Operational can be changed by the VOLTAGE SELECTOR (26) on the rear of the unit. Be sure the power switch is in the OFF position before making any type of connections to the mixer. Also be sure the power on all units being connected to the mixer have been switched off. Before switch the power on the mixer be sure MASTER VOLUME (13) is turned down and the power switch to all your amplifier are in the "OFF" position. Connect the mixers MASTER OUTPUT JACKS (31) to your audio system. Make sure that

User Guide and Reference ManualQ-FX19 User Guide and Reference ManualQ-FX19 Q-FX19™ CONTENTS Q-FX19™ CONTENTS 2 ELECTRICAL PRECAUTIONS...............................................................................................................4 SAFETY PRECAUTIONS.......................................................................................................................5 INTRODUCTION......................................................................................................