Any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty. This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in materials and workmanship for two years from the date of purchase without additional charge. The warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for any amount of damage in excess of the retail pur

• DO NOT OVERCHARGE: – AC recharge up to 14 hours maximum. – DC recharge up to 14 hours maximum. • NEVER ATTEMPTTO USE THE AC CHARGER AND DC CHARGING PORTSIMULTANEOUSLY. • After charging/recharging, disconnect charging adapter or extension cord and wait 5minutes before use. • Do not crush, cut, pull or expose charging adapter cords to extreme heat. • Position charging adapter cords so they do not become entangled or become a safetyhazard. Keep charging adapter cords away from sharp edges. • Use

IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. Catalog Number SL202B TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THE INSTRUCTION MANUAL SAVE THIS MANUAL FOR FUTURE REFERENCE. Cat. # SL202B Form # 90518422 May ’07 Copyright © 2007 Black & Decker Printed in China SL202B_ManualEN_050107.qxp 5/1/2007 4:15 PM Page 1 GENERAL SAFETY WARNINGS AND INST

Charge unit BEFORE first use using the 120 Volt AC Charger for20-30 hours or until the green Battery Status LED flashes. Charge after each use until green LED flashes. Charging/Recharging Using the 120 Volt AC Charger and a Standard HouseholdExtension Cord (not included) Plug a standard North American 120 volt AC extension cord (not included) into the 120 Volt AC Charger on theback of the unit. BATTERY STATUS LED INDICATOR BUILT-IN 120V AC CHARGER Make sure the Spotlight is OFF (the Trigger Lock

Charge after each use until red LED flashes. Charging/Recharging Using the 120 Volt AC Charger and a Standard Household Extension Cord (not included) Plug a standard North American 120 volt AC extension cord (not included) into the 120 Volt AC Charger on the back of the unit. BATTERY STATUS LED INDICATOR BUILT-IN 120V AC CHARGER Make sure the Spotlight is OFF (the Trigger Lock is in the OFF position and the Trigger is not depressed). 3 SL102B_ManualEN_051007.qxp 5/10/07 9:13 AM Page 4 Charge unt

INTRODUCTION Thank you for choosing the Black & Decker®V-1 Million Power Series™Spotlight.Please read this guide carefully before use to ensure optimum performance and to avoid damage to the unit. FEATURES • Powerful, focused quartz halogen beam • Protective rubber safety guard (bezel) around lens • Rubber safety cap protects battery compartment • Comfortable pistol grip • Battery Status LED Indicator • UL listed, built-in 120 volt AC charger that works with a standard household extension cord (

• Do not immerse spotlight in water. • Do not drop or throw spotlight. It contains glass and a sealed lead acid battery. • Only replace bulb with type indicated in specifications (12 volt, H3 75 watt quartz halogen). • Use only with AC or DC charging adapters that are provided with unit. Plug in the charging adapter at the spotlight first, then plug into the charging source. • Do not overcharge: – AC recharge up to 30 hours maximum. – DC recharge up to 4 hours maximum. • NEVER ATTEMPT TO USE THE

Wa s hhands after handling. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK: • Do not operate unit with damaged cord or plug; or if the unit has received a sharp blow, been dropped, or otherwise damaged in any way. • Do not open body casing. There are no user- s e rviceable parts inside; take it to a qualifieds e rvice technician when service or repair is required. Incorrect reassembly may result in arisk of electric shock or fire, and will void warranty. WARNING: FIRE HAZARD: Never contact combus

3. Loosen and remove six screws that secure spotlight housing. 4. Lift up and set aside the right side of the housing. 5. Remove wire spring and carefully pull out old bulb from the terminal. 6. Replace with a new H3 type, 12 volt, 100 watt bulb, available from an electrical supplyhouse or from Black & Decker (refer to the Service Information section). 7. Reverse the above procedure to re-assemble the spotlight. Note: When handling a new halogen bulb, do not touch the glass portion of the bulb.

IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. TO REDUCE THE RISK OF INJURY, THE USER MUST READAND UNDERSTAND THE INSTRUCTION MANUAL. SAVE THIS MANUAL FOR FUTURE REFERENCE. Cat. # CSL100MV Form # 90519934 June 2007 Copyright © 2007 Black & Decker Printed in China CSL100MV ManualEN 062007.qxp 9/26/08 11:22 AM Page 1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL