2 Clock Overview..................................................... 2 Front View........................................................... 2 Back View............................................................ 2 LCD Display......................................................... 3 Remote Sensor (THGN122N)............................. 4 Getting Started...................................................... 4 Batteries.............................................................. 4 Remote Sens

2 Back View ............................................................. 3 Remote Sensor ..................................................... 3 Getting Started.......................................................... 3 Insert Batteries ...................................................... 3 Remote Sensor ......................................................... 4 Sensor Data Transmission .................................... 4 Clock.............................................................

Indoor/Outdoor temperature indicator 3. Battery indicator 4. Time/temperature display 5. Time zone indicator 6. AM/PM indicator 7. Clock signal reception indicator BACK VIEW 2 1 1. Adaptor socket 2. Indoor temperature sensor BOTTOM VIEW 1 2 7 6 5 3 4 1. CLOCK: Set time and display mode 2. / : Increase / decrease setting; activate / deactivate clock reception signal 3. AUTO ON / OFF: Select auto toggle mode 4. °C / °F: Select temperature unit and display mode 5. Battery compartment 6. EU / UK: Se

°C / °F: Select temperature unit ICON DESCRIPTION Main unit is searching for sensor(s). A channel has been found. The sensor cannot be found. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. CLOCK CLOCK RECEPTION FRONT VIEW (FIG 1) 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4. RESET hole 5. CHANNEL switch GETTING STARTED INSERT BATTERIES 1. Remove the battery compartment. 2. Insert the

Moon phase reading 3. Weather forecast 4. Indoor temperature with temperature trend 5. Clock signal reception indicator 6. MODE: Change settings / display 7. / : Increase / decrease settings; activate / deacti vate clock reception signal 8. Outdoor temperature with temperature trend 9. Outdoor humidity with humidity trend 10. Weather warning message 11. Indoor humidity with humidity trend 12. Time zone 13. Clock with weekday 14. MEM: View current, maximum and minimum temperature / humidity 15. L

Disposable Lithium batteries have a much lower threshold for temperature with an estimated freezing range of below -30°C (-22°F). Wireless ranges can be impacted by a variety of factors such as extremely cold temperatures. Extreme cold may temporarily reduce the effective range between the sensor and the base station. If the unit's performance fails due to low temperature, the unit will resume proper functioning as the temperature rises to within the normal temperature range (i.e. no permanent d

NOTE The warning will automatically stop if the temperature goes outside the ice-warning range. HI / LO TEMPERATURE / HUMIDITY ALARMS Temperature and humidity alerts can be set to sound if sensor set to channel 1 records above or below a temperature/humidity of your choice. To set alarm ON / OFF: 1. Press and hold TEMP / HUMIDITY HI / LO . 2. Use and to select high / low temperature / humidity alarm. Press TEMP / HUMIDITY HI / LO to confirm. 3. Press / to set alarm ON / OFF and press TEMP / HUMI

3 Front View ................................................................ 3 Back View ................................................................. 4 Thermo-Hygro Sensor (THGR122NX) ..................... 5 Front View (UVN128) ............................................... 6 Back View (UVN128) ................................................ 6 Getting Started ........................................................... 7 Batteries ..........................................................