1 7 0710593 Wash Arm, Upper....................................................................... 1 8 0505042 Pivot, Upper Wash Arm ............................................................. 1 9 0308783 Retainer, Upper Pivot ................................................................. 1 10 0501563 Screw, #8 x 3/8 Truss Head........................................................ 2 11 0501684 Nut, Spray Arm Lock................................................................. 1 12 070504

d. Release the toggle switch to stop the water flow. e. You have complete the booster priming process. NOTE: Push the Installation and Service toggle switch to the ON position. Electrical power is now supplied to the machine. ! WARNING: Failure to prime the booster may cause damage to the booster elements and other electrical components and will void the warranty, 4. After plumbing and electrical connections are completed, check the machine for water leaks by depressing the ON/FILL/OFF/DRAIN to

Service Road Jordan Station, Ontario, Canada L0R 1S0 Moyer Diebel, Ltd. 905/562-4195 Fax: 905/562-4618 Complete the information below so it will be available for quick reference. Model Number __________________________ Serial Number ________________________ Voltage and Phase ______________________________________________________________ Moyer Diebel Parts Distributor _______________________________ Phone _____________ (if applicable) Moyer Diebel Service Agency ________________________________ P

Overview and Operation . Looking after your Dishwasher . Troubleshooting . Installation . General Information . Circuit Diagram . Technical Data 1. Before You Start At Time of Delivery Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged DO NOT USE. Contact your supplier or customer services. Please dispose of packaging materials properly. During Installation • Site the dishwasher and connect in accordance with the installation instructions. • The

1. Switch the dishwasher ON. 2. Press programme button to choose the desired programme. 3. Immediately press the Delayed Start button (Fig.2-17), the delayed start indicator illuminates; the time remaining indicator (Fig.2-18) changes to ‘1’. 4. Press the Delayed Start button as many times as necessary until the numerical display shows the required delay. 5. To cancel the time delay setting, pressing the Delayed Start button until the delayed start indicator and time remaining indicator go out.

Improper repairs can lead to considerable equipment damage as well as danger to the user. Problems with the appliance Error display on the programme indicator • When the programme indicators A1 and A2 blink (Fig.4-1). Have you checked if the door is closed properly? • When the programme indicators A1, A2 and A3 blink (Fig.4-2). Have you checked if: the water is turned on and the hose is connected properly; the water supply to the house is on and has sufficient pressure; the water supply hose is

11. Only qualified personnel should access the control panel after disconnecting main power supply. Tag the disconnect indicating work is being performed on that circuit. 12. Noise level of the machine is less than 67dB. The manufacturer declines any responsibility for any printing errors contained in this booklet. The manufacturer also reserves the right to make any modifications to its products that do not affect the basic characteristics thereof. TABLE OF CONTENTS TABLE OF CONTENTS PAGE Revis

8 10 100003 Nut (1/4-20 Hex Hd) .......................................................................... 8 11 0309473 Spacer.................................................................................................. 2 REPLACEMENT PARTS FRONT LEFT SIDE 2 1 2 3 7 6 8 7 13 9 8 5 4 5 312 10 11 10 Figure 24 - MH-60/6N/6L Wash/Rinse Spray Piping REPLACEMENT PARTS MH-60/6/6L WASH/RINSE SPRAY PIPING Fig. 24 Part Item No. No. Part Description Qty. 1 324526 Rinse Manifold Weldment ...............

Remove all dishes from machine. 2. Remove any chemical pick-up tubes from their containers. 3. Place each tube in a container of fresh water and prime the chemical lines for several minutes to thoroughly flush chemical from the lines. Leave pick-up tubes out of their containers. 4. Drain the machine and refill with fresh water. 5. Spray interior walls with delimimg solution and let sit for 5 or 10 minutes depending on amount of build-up. Add deliming solution to wash tank. Do not let chemicals s

2 11 107436 Screw (M6 X 16mm Filister) ........................................................ 4 12 107420 Nut, plain (M6) .............................................................................. 4 13 107399 Support, pivot block (top and side view shown) ........................... 2 14 107437 Bolt (M6 X 45mm Hex hd) ........................................................... 4 15 107396 Block, upper pivot ......................................................................... 2 16 1073