Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
• Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive). • Operation Mode: Select Infrastructure. 2. Using a network-connected machine 121 Wireless network setup • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) that is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the access point has security enabled. The wireless network security window appears. The window may differ according to its security mode: WEP or WPA. • WEP Select Open System or Shared Key for the authentication and enter the WEP security key. Click Next. WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. • WPA Enter the WPA shared key and click Next. WPA authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA also uses TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard) for data encryption. 2. Using a network-connected machine 122 Wireless network setup Wireless network setup The window shows the wireless network settings and check if settings When the window that tells you that the network cable connection is 14 15 are right. Click Next. confirmed appears, disconnect the network cable and click Next. •For the DHCP method If the network cable is connected, it may have trouble finding the machine when configuring the wireless network. If the IP address assignment method is DHCP, check if DHCP is shown in the window. If it shows Static, click Change TCP/IP to change the Wireless network setting is completed. To print from a Wi-Fi Direct assignment method to DHCP. 16 supported mobile device, set the Wi-Fi Direct Option (see "Setting up Wi •For the Static method Fi Direct" on page 131). If the IP address assignment method is Static, check if Static is shown in the window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. For example: If the computer’s network information is shown as follows: -IP address: 169.254.133.42 -Subnet Mask: 255.255.0.0 Then, the machine’s network information should be as shown below: -IP address: 169.254.133.43 • Wi-Fi Direct Option appears on the screen only if your printer supports this feature. -Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) • Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager -Gateway: 169.254.133.1 (see "Setting up Wi-Fi Direct" on page 131). Wi-Fi Direct Option: 2. Using a network-connected machine 123 Wireless network setup • Network Name(SSID): The default Network Name is the model name and the maximum length is 22 characters (not including "Direct-xx-"). • Network Key is the numeric string, and the size is 8 ~ 64 characters. When the wireless network settings are completed, disconnect the USB 17 cable between the computer and machine. Wireless network set up is completed. After the installation is finished, 18 click Quit. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Macintosh" on page 83). Setting the access point using the WPS button For models that have a WPS button, you can set the wireless network using the WPS button (without a USB connection) and access point (or a router) WPS button. Items to prepare • Access point (or wireless router) • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface Creating the infrastructure network Turn on your computer, access point, and machine. 1 Insert the supplied software CD into your CD-ROM drive. 2 Double-click the CD-ROM icon that appears on your Macintosh desktop. 3 Double-click the MAC_Installer folder > Installer OS X icon. 4 Click Continue. 5 Read the license agreement and click Continue. 6 Click Agree to agree to the license a...
Este manual também é adequado para os modelos :Impressoras - ML-2160 (5.92 mb)
Impressoras - ML-2160/STS (5.92 mb)
Impressoras - ML-2160/XAX (5.92 mb)
Impressoras - ML-2160/XAZ (5.92 mb)