Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Check the network name (SSID) on your access point and try connecting again. • Your access point is not turned on. Turn on your access point. 2. Using a network-connected machine 133 Wireless network setup Connecting Failure - Invalid Security • Security is not configured correctly. Check the configured security on your access point and machine. Connecting Failure - General Connection Error • Your computer is not receiving a signal from your machine. Check the USB cable and your machine’s power. Connecting Failure - Connected Wired Network • Your machine is connected with a wired network cable. Remove the wired network cable from your machine. PC Connection Error • The configured network address is unable to connect between your computer and machine. -For a DHCP network environment The receives the IP address automatically (DHCP) when computer is configured to DHCP. -For a Static network environment The machine uses the static address when the computer is configured to static address. For example, If the computer’s network information is as shown below: .IP address: 169.254.133.42 .Subnet Mask: 255.255.0.0 Then the machine’s network information should be as below: .IP address: 169.254.133.43 .Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) .Gateway: 169.254.133.1 Other problems If problems occur while using the machine on a network, check the following: For information on the access point (or wireless router), refer to its own user's guide. • Your computer, access point (or wireless router), or machine may not be turned on. • Check the wireless reception around the machine. If the router is far from the machine or there is an obstacle, you might have difficulty receiving the signal. • Cycle the power for the access point (or wireless router), machine, and computer. Sometimes cycling the power can recover network communication. 2. Using a network-connected machine 134 Wireless network setup • Check whether firewall software (V3 or Norton) is blocking the communication. If the computer and the machine are connected on the same network and it cannot be found when searching, firewall software might be blocking the communication. Refer to the user's guide for the software to turn it off and try searching for the machine again. • Check whether the machine's IP address is allocated correctly. You can check the IP address by printing the network configuration report. • Check whether the access point (or wireless router) has a configured security (password). If it has a password, refer to the access point (or wireless router) administrator. • Check the machine's IP address. Reinstall the machine driver and change the settings to connect to the machine on the network. Due to the characteristics of DHCP, the allocated IP address could change if the machine is not used for a long time or if the access point has been reset. Register the product's MAC address when you confogure the DHCP server on the access point (or wireless router). Then you can always use the IP address that is set with the MAC address. You can identify the Mac address of your machine by printing a network configuration report (see "Printing a network configuration report" on page 90). • Check the wireless environment. You might not be able to connect to the network in the infrastructure environment where you need to type in a user's information before connecting to the access point (or wireless router). • This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless communication types (e.g., Bluetooth) are not supported. • When using the ad hoc mode, in operating systems such as Windows Vista, you might need to set the wireless connection setting every time you use the wireless machine. • You cannot use infrastructure mode and ad hoc mode at the same time for Samsung wireless network machines. • The machine is within the range of the wireless network. • The machine is located away from obstacles that could block the wireless signal. Remove any large metal objects between the access point (or wireless router) and the machine. Make sure the machine and wireless access point (or wireless router) are not separated by poles, walls, or support columns containing metal or concrete. • The machine is located away from other electronic devices that may interfere with the wireless signal. Many devices can interfere with the wireless signal, including a microwave oven and some Bluetooth devices. • Whenever the configuration of your access point (or wireless router) changes, you must do the product's wireless network setup again. 2. Using a network-connected machine 135 Samsung MobilePrint What is Samsung MobilePrint? Samsung MobilePrint is a free application that enables users to print photos, documents, and web pages directly from your smartphone or tablet. Samsung MobilePrint is not only compatible with your Android, Windows and iOS smart phones but also with your iPod Touch and tablet PC. It connects your mobile device to a network connec...
Este manual também é adequado para os modelos :Impressoras - ML-2160 (5.92 mb)
Impressoras - ML-2160/STS (5.92 mb)
Impressoras - ML-2160/XAX (5.92 mb)
Impressoras - ML-2160/XAZ (5.92 mb)