Log:
Assessments - 2, GPA: 4.5 ( )

Instruções de Operação Samsung, Modelo ML-2165/XAA

Fabricante : Samsung
Arquivo Tamanho: 5.92 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


• For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is as shown follows: -IP address: 169.254.133.42 -Subnet Mask: 255.255.0.0 Then, the machine’s network information should be as below: -IP address: 169.254.133.43 -Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) -Gateway: 169.254.133.1 The Wireless Network Setting Complete window appears. Click Next. 9 When the wireless network settings are completed, disconnect the USB 10 cable between the computer and machine. Click Next. If the Change PC Network Setting window appears, follow the steps in the window. Click Next if you are finished with the computer’s wireless network settings. If you set the computer’s wireless network to DHCP, it will take several minutes to receive the IP address. Click Next when the Confirm Printer Connection window appears. 11 Select the components to be installed. Click Next. 12 After selecting the components, you can also change the machine name, 13 set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. After the installation is finished, a window asking you to print a test page 14 appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 16. If the test page prints out correctly, click Yes. 15 If not, click No to reprint it. 2. Using a network-connected machine Wireless network setup If you want to register your machine with the Samusng web site and receive useful information, click On-line Registration. If not, click Finish. Setup using Macintosh Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable Access point via USB cable Check whether the USB cable is connected to the machine. 1 Turn on your computer, access point, and machine. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder > Installer OS X icon. 5 Click Continue. 6 Read the license agreement and click Continue. 7 Click Agree to agree to the license agreement. 8 When the message that warns that all applications will close on your 9 computer appears, click Continue. Click Wireless Network Setting button on the User Options Pane. 10 The software searches the wireless network. 11 If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instructions in the window. 2. Using a network-connected machine 120 Wireless network setup • If wireless network setting has been set before, Wireless Network Setting Information window appears. If you want to reset the wireless settings, check the check box and click Next. • For models that support the WPS button (without a USB cable connection), the window shown below will appear. -With a USB Cable: Connect the USB cable and click Next, then go to step 7. -Using the WPS Button: See "Access point via WPS button (without a USB cable connection)" on page 115. Select the method to use from the wireless set up method window. 12 •Configure the wireless settings manually.: Go to step 13. •Configure the wireless settings by pressing the WPS button on the access point.: Connect to the wireless network by press the WPS button on the access point (or a wireless router). -Follow the instructions in the window. When you are done setting the wireless network settings, go to step 16. After searching, the window shows the wireless network devices. Select 13 the name (SSID) of the access point you are using and click Next. When you set the wireless configuration manually, click Advanced Setting. • Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive). • Operation Mode: Select Infrastructure. 2. Using a network-connected machine 121 Wireless network setup • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) that is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If yo...

Este manual também é adequado para os modelos :
Impressoras - ML-2160 (5.92 mb)
Impressoras - ML-2160/STS (5.92 mb)
Impressoras - ML-2160/XAX (5.92 mb)
Impressoras - ML-2160/XAZ (5.92 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias