J Switch the device off and allow it to come to a standstill before you put it down. J Always keep the device clean, dry and free of oil or grease. GB General safety advice/Preparing for use Q Have you understood everything? J Once you have made yourself familiar with the instructions and advice, the functioning and handling of your device, you are finally in a position to start work. Observing the manufacturer‘ s instructions and advice will maximise your safety while working with the device. Q

Caution – electric shock! Dangerous electric current – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. V~ Voltage Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs.

J When undertaking prolonged sanding of wood, and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. J Ensure that there is adequate ventilation when working on plastic, paint, varnish etc. J The belt sander is designed for the dry sanding of large surfaces of wood, plastic, metal and plaster and painted surfaces. The device is to be used for dry sanding only. J Do not sand mate

The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Q Operation Q Operation Take note of the mains voltage! The voltage must agree with the information on the type plate of the appliance (appliances that are designated as 230 V can also be connected to 220 V). Q Switching On and Off Switching on intermittent function: j Press the ON/OFF switch 1 . Switching off intermittent function: j Release the

Workplace safety.....................................................................................................Page 7 2. Electrical safety ........................................................................................................Page 7 3. Personal safety .........................................................................................................Page 8 4.Careful handling and use of electrical power tools..............................................Page 8 Safety a

Workplace safety .....................................................................................................Page 7 2.Electrical safety.........................................................................................................Page 7 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools................................................Page 8 Safet

A worn out grinding wheel 4 needs to be replaced. This is necessary when the specified gap cannot be achieved even after readjusting the positions of the workpiece/tool rest 5 and/or the eye guard mount 2 . Preparing for first use Switching on and off The voltage must agree with that shown on the device rating plate (devices shown as 230 V can also be connected to a 220 V supply). GB/IE/CY Preparing for first use / Maintenance and cleaning Switching on j Press the ON / OFF switch 9 into the „1“

An accessory rotating faster than its permitted speed could disintegrate or fly off. e) The external diameter and the thickness of the attachment must be compatible with the dimensions of your electrical power tool. Attachments that are not dimensionally compatible cannot be adequately guarded or controlled. f) Grinding discs, flanges, grinding wheels or other accessories must fit exactly on to the spindle of your electrical power tool. Attachments that do not exactly fit on the spindle turn u

J Provide for sufficient ventilation when working plastics, varnishes and paints. J Do not soak materials or surfaces to be worked with liquids containing solvents. The heat generated during sanding can give rise to vapours that are toxic or hazardous to health. J Avoid sanding lead-based paints or other materials that are hazardous to health. J Material containing asbestos may not be worked. Asbestos is considered to be a carcinogen. J Avoid contact with the moving sanding sheet. J Use the appl

GmbH Burgstra.e 21 D-44867 Bochum (Germany) Last Information Update 08/2007 Ident.-No.: PDS 200 A082007-6 N A B E F C D G H I K 1 2 3 5 4 6 7 8 9 11 10 12 13 14 7 2 2 M 7 L 5 7 14 2 2 33 6 5 6 O 7 N A B E F C D G H I K 1 2 3 5 4 6 7 8 9 11 10 12 13 14 7 2 2 M 7 L 5 7 14 2 2 33 6 5 6 O 7 Table of contents Introduction Proper use.....................................................................................................................................Page 6 Features and equipment.........