(sDCjD RANDOM ORBITAL SANDER EXCENTERSLIBER Operation and Safety Notes Brugs- og sikkerhedsanvisninger Translation of original operation manual Overs^ttelse af den originale driftsvejledning
Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. e) Look after the device carefully. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poor
■ (ID CiD BELT SANDER Operation and Safety Notes Translation of original operation manual PBS 600 Al BANDSCHLEIFER Bedienungs- und Sicherheitshinweise Originalbetriebsanleitung (dF) (GB> (AT) (JL> Сен)
C). • Rotating the backing plate HWARNIN ¡G! Always pull the mains plug is out of the socket before doing any work on the device. □ Rotate the backing plate into the desired position (see Fig. D). Sanding and surfaces: The sanding output and the quality of the surface finish are determined by the grade of grit on the sanding sheet. □ Always use sanding sheets with grades that are suitable for the particular surface you are sanding. 10 GB/IE III PARKSIDE Preparing for use / Maintenance a
Further details can be found in the operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Intended utilisation The device is intended for dry-sanding wood, metal and paint. Any other uses, and modifications to the appliance, are deemed to be improper usage and may result in serious physical injury. The manufacturer will not accept liability for loss or damage arising from improper
To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Proper use The belt sander is designed for dry sanding of large surfaces of wood, plastic, metal, plaster and painted surfaces. The device may only be used for dry sanding. Always use a sanding belt and grade of grit suitable for the particular surface you are sanding. The speed
For this reason, always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. ■ Q Warning! noxious fumes! Any harmful / noxious dusts generated from sanding represent a risk to the health of the person operating the device and to anyone near the work area. UJwARNI nG|bUBThAbA03! When sanding wood and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suita
To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Proper use The cordless multi-grinder is intended to be used for drilling, milling, engraving, polishing, cleaning, grinding, cutting and sawing wood, metal, plastic, ceramics or stone in dry environments. Any other use or modification to the drill / grinder shall be considered
Komperna. GmbH Burgstra.e 21 44867 Bochum (Germany) Last Information Update: 11 / 2007 · Ident.-No.: XQ 600112007-6 GB / IE / CY Operating and safety instructions Page 5 Orbital Sander XQ600 Orbital Sander Operation and Safety Notes Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. 11023478 569 11023478 569 a B C d 11 Table of Content Introduction Intended utilisation ...........................................................
It can be prevented by taking the appropriate precautions as described below. a) Maintain a firm grip on the electrical power tool and position your body and arms to allow you to resist kickback forces. Always use the auxiliary handle, if provided, to exercise the greatest possible control over kickback forces or reaction torques as the device builds up to full speed. By taking 10 GB/IE III PARKSIDE General safety advice for electrical power tools suitable precautions the operator can contr