4. Make sure the vacuum bag strap is adjusted to allow a free flow of air from the vacuum bag elbow tube (Fig. 19). If the bag is kinked, the tool will not operate properly. WARNING: To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc., because they could get drawn into the air intake. Also make sure long hair does not get drawn into the air intake. Long hair must be pulled back and secured off shoulders and neck. Fig. 19 H

1. With the unit off and unplugged, install the blower tube onto the motor housing. Turn the tube clockwise until it locks (Figs. 1, 2 and 3). ASSEMBLY PARTS BLOWER MODEL-180r ASSEMBLY PARTS BLOWER MODEL-190r BLOWER TUBE REAR HAND GRIP MOTOR HOUSING BLOWER NOZZLE TUBE MOTOR HOUSING 2. Insert the blower nozzle or concentrator tube onto the blower tube and turn it clockwise to lock (Figs. 2, 3 and 4). ASSEMBLY INSTRUCTIONS 2. Align the arrow on the upper vacuum tube with the arrow on the motor hou

Turn the lower vacuum tube clockwise until it snaps into detent and locks. (The dot on the lower tube aligns with the dot on the upper tube when properly assembled.) Lower Vac Tube Rg. 12- INSTALLING THE COMPLETE VACUUM TUBE ASSEMBLY TO THE BLOWER/VACUUM (MODEL 310BVr ONLY) WARNING: Do not install the vacuum tubes while unit is running to avoid serious personal injury. 1. Grasp the assembled vacuum tube firmly with both hands. Turn the tube/adapter clockwise as far as possible to the end of

or 1-800-668-1238 in CANADA IMPORTANT MANUAL DO NOT THROW AWAY INTRODUCTION THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. PRODUCT REFERENCES, ILLUSTRATIONSAND SPECIFI

They should also be included as part of any seasonal tune-up. A WARNING: To prevent serious injury, never do maintenance or repairs with unit running. Always do maintenance and repairs on a cool unit. Disconnect spark plug wire to ensure the unit will not start. FREQUENCY MAINTENANCE REQUIRED REFER TO: Before Starting Engine Fill fuel tank with correct oil and fuel mixture Page 12 Every 10 Hours Clean and re-oil air filter Page 15 Every 25 Hours Check spark arrestor condition and clean Chec

Installing the Vacuum Bag Assembly (Optional for Model 310r) ......................................6 C. Installing the Adapter (Optional for Model 310r) ......................................7 D. Installing the Vacuum Tubes (Optional for Model 310r)....................................7-8 IV. Oil and Fuel Information ............................................9 V. Starting/Stopping Instructions..................................10 VI. Operating Procedures .........................................

NOTE: If additional cleaning of the bag is required, see Cleaning the Vacuum Bag in Maintenance. 4. Zip close and reinstall the vacuum bag. Fig. 15 WARNING: Avoid situations that could catch the vacuum bag on fire. Do not operate near an open flame. Do not vacuum warm ash from fireplaces, barbecue pits, brush piles, etc. Do not vacuum discarded cigars or cigarettes unless the cinders are completely cool. MAINTENANCE AND REPAIR INSTRUCTIONS MAINTENANCE AND REPAIR INSTRUCTIONS NOTE: Some maintenan

SAVE THESE INSTRUCTIONS 4 FEATURES PRODUCT SPECIFICATIONS Weight ............................................................................................................................................................................4 lbs. Air Velocity: MPH...............................................................................................................................................................................150 CFM ........................................................

When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS . Introduction......................................................................................................................................................................2 . Important Safety Instruc

Shorting the battery terminals together may cause sparks, burns, or a fire. . Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the blower’s operation. If damaged, have the blower serviced before using. Many accidents are caused by poorly maintained blowers. . Keep the blower and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum- based products, or any