Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Refer to the Auto Season Changeover section on page 37. system Fan Key ¦ Press to set the fan operation. ¦ AUTO: the fan will turn on with the system. ON: the fan will run continuously. PROG Auto or ON: (Programmable Fan) The fan will select AUTO or ON, depending on the setting in the programs. Refer to the Program Option section on page 30. NOTE: The fan must be set to “PROG” for the fan’s program settings to take effect. fan Reviewing the Current Temperature Setting ¦ Current time and temperature. ¦ Thermostat is set to AUTO and the heating system is selected. ¦ Press for 1 second or less. ¦ Set Temperature is shown beside current room temperature. ¦ If held for over 1 second, Temporary Manual Override mode is entered. Refer to the next section. or Temporary Manual Override To temporarily change the current set temperature without affecting your program: ¦ Press or and hold for about 1 second to enter Manual Override mode. Display will flash. ¦ Press or to change to your desired new temperature. ¦ Press to return to normal mode, or wait 5 seconds for it to return automatically. ¦ The current program number will flash to signify the Temporary Override. ¦ At the next program change, the Temporary Override is canceled, and the next program temperature becomes the setpoint temperature. To end the Temporary Manual Override: ¦ Press to return the set temperature to the current program set temperature. NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Temporary Manual Override. Refer to the Auto Season Changeover feature on page 39 for more information. NOTE: If Vacation Hold is set, then the number of days remaining will also be displayed. Refer to the Vacation (Programmable) Hold section on page 36 for more information. ret/clear ret/clear Permanent Manual Override To hold your manual override for an extended period of time: ¦ Press to make the current room temperature the HOLD temperature. HOLD will alternate on the display with the day and any other messages. ¦ Follow the Temporary Override instructions above to change the Permanent Override temperature. ¦ You can confirm the held set temperature by pressing for less than 1 second. To end the Permanent Manual Override: ¦ Press to return to the current program. The HOLD display will be canceled. NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Permanent Manual Override. Refer to the Auto Season Changeover feature on page 36 for more information. hold or ret/clear Vacation (Programmable) Hold This thermostat can hold a fixed temperature for a selected number of days (up to 30). After the selected number of days, the thermostat will return to normal program operation. This feature allows you to return home to your normal comfort setpoint temperatures. ¦ Press and hold for 2 seconds to enter Vacation Hold mode. The set temperature will be the current room temperature and the Vacation counter will be set to 1 day. ¦ Use to set the Vacation Hold temperature. ¦ Press to set the Vacation Hold counter to the number of days you will be away from home. ¦ “Vacation” will alternate on the display with the day and any other messages. To end Vacation Hold: ¦ Press to return to the current program. The flashing Vacation display will be canceled. NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Vacation (Programmable) HOLD. Refer to the Auto Season changeover feature on page 37 for more information. hold or day/time ret/clear Auto Season Changeover When the System Selection is in AUTO position, the thermostat will automatically change between Heating and Cooling systems, depending on your program. We recommend keeping your programmed heating and cooling temperatures at least 5°F (3°C) apart to allow the Auto Season Changeover to occur when the appropriate temperature span has been reached. However, if your heating and cooling programs set temperatures are close, there is a built-in program to prevent the thermostat from changing unnecessarily. Auto Season Changeover is disabled when the thermostat is in Temporary or Permanent Override, or Vacation Hold, as these overrides are energy saving settings. While in any of these modes, “AUTO” will be temporarily removed form the LCD display. “AUTO” will return when these holds are cleared. Auto Season Changeover will still function in Home Today mode, as this is a comfort setting. For example, you may have the following temperatures programmed at a given time: Heat Set Temp = 68°F Cool S...
Este manual também é adequado para os modelos :Os termostatos - 44660 (3.29 mb)
Os termostatos - 44008-01 (3.29 mb)
Os termostatos - 44660 (3.29 mb)
Os termostatos - 44668 (3.29 mb)