Assessments - 3, GPA: 4 ( )

Fabricante : FCI Home Appliances Arquivo Tamanho: 2.84 mb Arquivo Nome : Língua de Ensino:

13" (33 cm) MAX DEPTH WALL COVERING CABINETS, OF UNPROTECTED AND COUNTERTOP MUST OVERHEAD CABINETS WITHSTAND HEAT UP TO 200 °F MIN 30" (76.2 cm) 30" (76.2 cm) MIN (see NOTE) CLEARANCE FROM COUNTERTOP TO UNPROTECTED OVERHEAD SURFACE 18" (45.7 cm) MIN HEIGHT FROM COUNTERTOP TO NEAREST CABINET ON EITHER SIDE OF UNIT 003 5" (12.7 cm) MIN CLEARANCE FROM CUTOUT TO SIDE WALL ON THE LEFT AND RIGHT OF THE UNIT Figure 3. Cutout requirements NOTE: • If cabinet has a drawer, a 5-1/4"(13,35 cm) depth clearance from the top of the countertop to the top of the drawer (or other obstruction) in base cabinet is required. The drawer depth may need to be shortened to avoid interfering with the regulator. • 24" (61 cm) min. clearance if bottom of wood or metal cabinets is protected by not less than 1/4" (0.6 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel 0.015" (0.04 cm) stainless steel, or 0.024" (0.06 cm) aluminium or 0.020" (0.05 cm) copper. 30" (76.2 cm) min. clearance between top of cooking platform and bottom of unprotected wood or metal cabinet. GAS OPENING FOR COOKTOP INSTALLATION OVER BUILT-IN OVEN 2-9/32" (6 cm) FROM REAR CORNER OF CUTOUT TO HOLE 4-25/32" (12.15 cm) FROM TOP OF COUNTERTOP TO HOLE (HOLE DIAMETER 1-1/5")(3 cm) 2-19/32" (6.55 cm) OF RIGHT REAR CORNER OF CUTOUT 2-9/32" (6 cm) FROM THE BACK CORNER OF CUTOUT ELECTRICAL OUTLET 12" (30.5 cm) BELOW FROM BOTTOM OF COUNTERTOP 004 Figure 4. Gas and Electrical Line Opening 6 Cooktop & Installation Manual Model COGB ENGLISH Important: • For solid surface material installations such as Surel™ and Corian®, consult with solid surface manufacturer. Apply heat reflective tape such as Scotch® Aluminum Foil Tape #425 or #427 around the cutout so that it folds over on the top and sides. • DO NOT WRAP THE TAPE UNDERNEATH THE COOKTOP. • Be sure the tape extends beyond the outermost flange of the cooktop. All corners should be covered with tape. SHOWS LOCATIONS OF ALUMINUM REFLECTIVE TAPE TAPE TOP AND VERTICAL SIDES OF CUTOUT 005 Figure 5. Solid surface countertop installation 7 Cooktop & Installation Manual Model COGB ENGLISH 8 Cooktop Installation WARNING • Excessive Weight Hazard Use two or more people to move and install cooktop. Failure to do so can result in back or other injury. • Cut Hazard Beware of sharp edges. The polystyrene ends when carrying the product. Failure to use caution could result in minor injury or cuts. • Always consult the countertop manufacturer for specific instructions. • Ensure the countertop is square and level and ensure no structural members interfere with space requirements. • Prepare the cut-out according to the instructions (see cut-out dimensions). • Make sure the wall coverings, countertop and cabinets around the cooktop can withstand heat (up to 200 °F). 006 Figure 6. Tools you will need Step 1 Remove packaging materials and literature package from the cooktop before beginning installation. Remove Installation Instructions from literature pack ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :