-HVI CERTIFIED 120 Volts, 1.9 amps, 60 hz. Grill White, round polymeric grill secured in place with torsion springs; easily removed if necessary, dimensions - 133/4" dia. Light Lens Moonstone glass lens, secured in position using 5 philips head screws. Light Housing Heavy gauge cold rolled steel c/w powder coat finish; locks in place on the housing using a wing nut. Blower Wheel One piece polymeric wheel, 51/8" diameter, 23/8" wide, with 48 fins. Motor Heavy duty, permanently split ca

-HVI CERTIFIED 120 Volts, 1.9 amps, 60 hz. Grill White, round polymeric grill secured in place with torsion springs; easily removed if necessary, dimensions - 133/4" dia. Light Lens Moonstone glass lens, secured in position using 5 philips head screws. Light Housing Heavy gauge cold rolled steel c/w powder coat finish; locks in place on the housing using a wing nut. Blower Wheel One piece polymeric wheel, 51/8" diameter, 23/8" wide, with 48 fins. Motor Heavy duty, permanently split ca

lete with reset button Available Finishes White, Biscuit, Almond, Black & Stainless Steel. PERFORMANCE Air Flow - CFM Static Pressure (inches of w.g.) HVI Sones @ .1SP Fan Speed RPM Power Watts 0 0.1 0.125 0.15 0.2 0.25 0.375 0.5 Horizontal Ducting (High Speed) 391 380 377 374 368 362 347 330 8.0 1408 233 Horizontal Ducting (Low Speed) 114 100 96 93 86 80 66 45 1.5 626 59 Vertical Ducting (High Speed) 313 300 297 294 288 281 266 249 8.5 1512 212 Vertical Ducting (L

Dishwasher safe material. Removable design for easy cleaning, secured in place using spring retaining ring and air directing venturi ring. Electrical connection Hood top - 7/8" electrical knockout. Hood back - 7/8" electrical knockout. VH SERIES 21/4" x 10" knock-out for Filters UL rated, class 2 filter. Grease Filter: 30" models - GF-04, 36" models GF-05 (included). Charcoal Filter: 30" models - CF-04, 36" models GF-05 (not included). Electronic Controls Motor speed control - 4 speed

Horizontal Ducting 300 CFM/8.5 Sones (High) - 100 CFM/2.0 Sones (Low) @ 0.10" WG. Vertical Ducting _120 Volts, 2.5 amps, 60hz_ Dimensions Overall hood projection - 201/2" Height - 41/2", Available widths: 30" & 36" Hood Body 24 gauge cold rolled steel, coated with a baked enamel finish or 24 gauge #4 - 430 stainless steel & 24 gauge galvanized steel. Decorative polymeric side panels PC/ABS. Durable non-stick coated 24 gauge bottom cover. Motor Fully enclosed 4 pole, electronically balance

HVI CERTIFIED 120 Volts, 2.8 amps, 60 hz. • Dimensions Overall bottom projection - 19H/16" Height (less chimney) -91/4" Available widths: 30" & 36" • Hood Body All metal cold rolled or stainless steel, finished in powder coat or brushed stainless steel. • Motor 3 speed, permanently split capacitor motor. Rated 120 volts, 60 hz., 2.8 amps. • Lighting 2 - fully enclosed 40 watt maximum candelabra bulbs. • Ducting Options Vertical ducting: 6" round duct adapter complete with polymetric

NOTE: ALL HARDWARE REFERRED TO IN THE INSTRUCTIONS MAY BE FOUND IN THE SUPPLIED PARTS BAGS. BASE ASSEMBLY (Figure 1) 1. Place Base on floor. 2. Fit Mounting Flange through large hole in center of Base. 3. Insert (4) 3/8-16 X 1” Carriage Bolts through Mounting Flange and Base. 4. Tilt Base and secure one Carriage Bolt at a time by first putting on a 3/8” Split Lockwasher and then a 3/8-16 Hex Nut. DO NOT FULLY TIGHTEN AT THIS TIME. Repeat above procedure with remaining Bolts. 5. GO BACK AND FULLY

(Figure 4-Detail A) New 3/04 OPERATING INSTRUCTIONS 1.)TO OPERATE: Plug cord into a grounded 120V, 60 Hz outlet. Select desired operating speed with pull cord on the rear of the motor: First pull: High Second pull: Medium Third pull: Low Fourth pull: OFF NOTE: This fan is very heavy. Failure to securely hold onto head assembly while adjusting head height or head angle could result in personal injury. 2.)TO ADJUST HEAD ANGLE: While holding head firmly, loosen knob under motor (turn counterclockwi

3. Loosen knob and return head to a vertical postion. Retighten knob. 4. Push fan blade onto motor shaft, center hub facing away from motor, until it stops against shaft. Align bolt head set screw with flat of the motor shaft. TIGHTEN VERY SECURELY WITH AN ADJUSTABLE WRENCH. Failure to securely tighten set screw could result in damage to the fan and/or personal injury. 5. Hold the front grill so that the name, in the center, is right side up and straight across. Starting at the top: Fasten front

Any part which is determined by AirKing to be detective in material or workmanship and returned to an authorized service location, as AirKing designates, shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced at AirKing’s option. For limited warranty claim procedures, see PROMPT DISPOSITION below. This limited warranty gives purchasers specific legal rights which vary from state to state. LIMITATION OF LIABILITY. To the extent allowable under applicable law. AirKing’s lia