• Before connecting the heater, check that the voltage indicated on the rating plate corresponds to the mains voltage in your home / office. •Avoid the use of an extension cord because it may cause the heater to overheat. •Warning. Risk of Fire. Discontinue use if the outlet or plug become hot to the touch. Overheating may indicate a worn or damaged outlet. Consult a qualified electrician for outlet replacement. Safe positioning •Only touch the heater with dry hands • DO NOT position where it ca

• To disconnect from the electrical supply, grip the plug and pull from the wall outlet. DO NOT pull on the mains cable. • Always use on a dry, level surface. • Do not operate without the fan grills properly in place. • This product is intended for household use ONLY and not for commercial or industrial applications. • If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard. • The appliance conta

• Do not use outdoors. • The fan should not be operated without its base fitted. • The fan should not be operated laying on its side. • Under the environment with electrical fast transient, the product may malfunction and require user to reset the product. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the a

THIS PRODUCT IS MANUFACTURED TO COMPLY WITH THE E.E.C. DIRECTIVES 73/23/EEC, 89/336/EEC AND 98/37/EEC. ®® 9100010004571 BASF40WIUK04EM1 BASF40W CONTEMPORARY STAND fan INSTRUCTION MANUAL Holmes Products (Europe) Ltd 1 Francis Grove London SW19 4DT England Fax: +44 (0)20 8947 8272 Email: info-europe@theholmesgroup.com Website address: UK - Free phone Customer Service Helpline – 0800 052 3615 BASF40WIUK04EM1 V1.qxd 12/20/04 4:22 PM Page 4 U.K. and IRELAND PLEASE READ AND SAVE THESE IMPORTANT INSTRU

Step 3: Plug cord into any standard 120V AC outlet. Step 4: To turn the fan on press the POWER button on the remote control or on the control panel. Step 5: The speed is adjustable by pushing either the speed button on the remote control, or on the SPEED button on the control panel. Push this button once for LOW, again for MEDIUM, and a third time for HIGH. Push a fourth time to repeat the sequence. To turn the fan OFF, push the OFF button on the remote control, or on the control panel. Step 6:

This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse theplug. If it still does not fit, contact qualified personnel toinstall the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY. OPERA TING INSTRUCTIONS (FOR REMOTE Step 1: Insert 2 AAA batteries into the control. Remote Control: Your remote control requires 2 AAA batteries for operation. To install the batteries, simply depress the back of the remote with

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY. ASSEMBLY INSTRUCTIONS A. Grill Hub B. Front Grill C. Fan Blade Nut D. Fan Blade E. Rear Grill Mounting-Ring F. Rear Grill A B C D E F G H I J K P Q L Figure 1 BSF1731 G. Motor Shaft H. Motor Housing I. Upper Pole J. Height Adjustment Knob K. Lower Pole L. Base Insert M. Base N. Weighted Insert O. Weight Nut P. Fixed Screw Q. Grill Ring R. Remote Control Housing S. Fan Post Screw T. Remote Control M N O I K S R H GT J Figure 2 BS

Instruction Leaflet % INFO-LINE If after having read this leaflet, you have any questions or comments on your fan, call 1-800-788-5350 in North America. FAN SAFETY PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using the appliance. 2) To avoid fire or shock h

4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning. 6. Avoid contact with moving parts. 7. DO NOT operate in the presence of explosive and/or flammable fumes. 8. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance. 9. DO NOT operate any appliance with a da