Extension cord use is determined by the input amp rating (2.2 amps) of the charger. Minimum size (AWG rating) of a 25 foot cord is 18 gauge. Minimum size (AWG rating) of a 50 foot cord is 18 gauge. Minimum size (AWG rating) of a 100 foot cord is 14 gauge. Minimum size (AWG rating) of a 150 foot cord is 12 gauge. Never alter extension cords. SKU 03418 For technical questions, please call 1-800-444-3353. Page 6 Operation (continued) Preparing the Battery 1. If necessary, remove the battery from th

The model BCR3312V can charge almost any 4.8, 6, 7.2, 9.6, 10 or 12V Volt NiMH, NiCd or Lead Acid rechargeable battery, but is not compatible with Li-Ion batteries. When recharging NiCd type batteries, the BCR3312V will operate as an AC/DC Battery Charger and Reconditioner to help avoid developing memory in your battery. This charger will operate from a standard household AC outlet, or on the road from a 12 Volt cigarette lighter socket. It is a complete, convenient system to charge and conditio

14. Risk of Explosion! If you detect gas, do not switch off the unit. Do not disconnect the charging • clamps. Immediately ventilate the room by opening windows and doors. Do not switch on an electrical fan. When the air has cleared of gas, unplug the unit from the electrical outlet. Charge the battery in a well-ventilated area.• To prevent sparking due to electrostatic discharge, never wear clothes made of • synthetic materials when charging the battery. Avoid creating or working around any fla

14. Use this product in accordance with the battery’s and vehicle’s instruction manual recommendations, safety warnings and charging instructions. 15. Never leave Battery Charger unattended. 16. Batteries can explode under certain conditions; excessive heat and/or poor ventilation can cause explosive gas buildup and battery explosion. Surges in electrical power supply could possibly cause battery explosion. Battery Charger should be plugged into a surge protection device. SKU 45005 For technical

Periodically check the condition of the charger and batteries. Do not over charge the batteries. The green light will stay on until you remove the 9V batteries from the Battery Compartment. Note: Unplug and then re-plug the Fast Battery Charger each time you recharge the empty batteries, to reset the charger. Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this product. TROUBLESHO

11. DO NOT BURN OR INCINERATE BATTERY PACKS. Battery packs may explode, causing personal injury or damage. Toxic fumes and materials are created when battery packs are burned. 12. DO NOT CRUSH, DROP, OR DAMAGE battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over, or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on). 13. DO NOT DISASSEMBLE. Incorrect reassembly may result in the risk of electric shock, fire or exposu

As with other battery pack types, per- Symbology tors current draw and temperature. manent capacity loss can result if the pack is stored for long periods of time at high tem- In extremely high torque, binding, stalling, peratures (over 120° F). MILWAUKEE Lith and short circuit situations, the battery pack ium-Ion battery packs maintain their charge will turn OFF the tool if the current draw during storage longer than other battery becomes too high. In these situations, types. After about six mo

Store your battery pack in a cool, dry place. Do not store it where the temperature may exceed 120°F (50°C) such as a vehicle or metal building during the summer. High temperatures will overheat the battery pack, reducing battery life. If it is stored for several months, the battery pack will gradually lose its charge. One to three cycles of charging and discharging through normal use will restore the capacity of the battery pack. During the life of the battery pack the operating time between ch

3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual p