Holding down the cue button changes the cue function to preview (allowing you to hear the music play at whatever tempo you adjusted to by holding the cue button down). Releasing the cue button returns you to the preset cue point. CUE/B REPEAT: After the cue point is memorized, pressing the CUE/B BUTTON (12) in the play mode, (the cue LED BLINKS yellow), repeats the section between the cue point and the point where the CUE/B BUTTON (12) was pressed (there will be a slight delay between the end an

If they are okay, check your amplifier or receiver. • If the CD skips, check the CD for dirt or scratches. Do not assume that the CD player is defective. Many CDs are recorded out of spec and will skip on most or all CD players. Before sending the unit in for repair, try playing a CD that you are sure plays properly. SPECIFICATIONS GENERAL: Type.................... Dual Mechanism Compact Disc Player w/wired remote Disc Type............................... Standard Compact discs (12 cm & 8 cm) Tim

PLAY/PAUSE: Each press of the PLAY/PAUSE BUTTON (5) causes the operation to change from play to pause or from pause back to play. See the CUE INSTRUCTIONS section for more information. TRACK SKIP: The TRACK SKIP BUTTONS (6) let you select the track to play. SEARCH JOG WHEEL: The SEARCH JOG WHEEL (7) is used to accurately position the disc at the point where you wish the track to start playing. This position on the track will be memorized as the CUE POINT. Each move of the SEARCH JOG WHEEL (7), i

In play mode, pressing a CUE BUTTON will pause play and bring you to the CUE POINT when you can then press the play/pause button to play from the CUE POINT. SET CUE: Use the SET CUE (10) button to activate the DIRECT ACCESS BUTTONS to set a CUE POINT. See the CUE INSTRUCTIONS section for more information. DIRECT ACCESS BUTTONS: Use the DIRECT ACCESS BUTTONS (2) to select what track to play and to set a CUE POINT. See the CUE INSTRUCTIONS section for more information. SINGLE-AUTO CUE/CONTINUOUS:

Press the SET CUE BUTTON (15) (the LED will light). Use the DIRECT ACCESS (2) buttons to memorize the spot at which you want play to start, the CUE POINT, by selecting the proper track, minute, second and frame. Press CUE 1 to set the cue to CUE 1 (press CUE 2 if you wish to set the cue to CUE 2). You can do this in any mode, including PLAY MODE, so that you may cue a track while playing a track. SUGGESTION: To avoid confusion while setting cue points, keep the time display in ELAPSED TIME mode.

Manual de Funcionamient. Manual de Fonctionnemen. Manual del Utent. CDJ-3. PROFESSIONAL CD PLAYE. PROFESSIONELLER CD-SPIELE. REPRODUCTOR DE CD PROFESIONA. LECTEUR CD PROFESSIONNE. LETTORE CD PROFESSIONAL. MULTI-LANGUAGE INSTRUCTION. Englis. Page . Deutsc. Page . Espano. Page . Francai. Page 1. Italian. Page 1. Page 1 1 1412 15 17 18 19 2316 20 21 5 6 7 13 2 2 3 4 BOP 1 1412 15 17 18 19 2316 20 21 5 6 7 13 2 2 3 4 BOP 8 22 9 10 11 24 Suggestion: Do not place any container with liquid in it on top

Releasing the buttons will return the pitch to the original pitch setting. You can use this function to match the beat when mixing from one track to another. DIGITAL OUTPUT JACK: Connecting any type of DAT, MD, HARD DRIVE, or other such items which accept digital signals to the BNC (1) output connector on the rear panel of the transports allows you to record a digital signal from CD. MASTER TEMPO: MASTER TEMPO (25) This control locks in the music’s pitch even when the tempo changes. You can vary

To eliminate confusion, only the CDX601 illustration is fully numbered. Controls placed in different locations or not duplicated are theROBO START (25) and POWER (1) switches. WICHTIGER HINWEIS Der CDX-602 ist ein DoppelCD- Spieler, wiederholen sich die meisten Funktione und Steuervorrichtungen auf beiden Seit des CD-Spielers CDX-601 und CDX-602. Um Verwirrung vorzubeugen und die Zeichnungen leichter verstandlich zu machen sind nur die Funktionen und Steuervorrichtungen auf der CDX601 Seite mit

LOOP: After a cue point is programmed, pressing LOOP (11) while in the PLAY mode (CUE LED blinks yellow) repeats the section between the cue point and the point where the LOOP button was pressed. Press EXIT/RETURN or PAUSE/PLAY to EXIT Loop repeat. EXIT/RETURN: Press loop EXIT/RETURN (12) to return to the beginning of the previously saved loop from normal play. SINGLE-AUTO CUE/CONTINUOUS: Pressing SINGLE-AUTO CUE/ CONTINUOUS (5) activates the AUTO CUE FUNCTION. The Auto Cue causes the CD to paus

Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician. CONNECTIONS: 1. Plug one end of a set of RCA connectors into each of the LINE OUTPUT (2) jacks. 2. Plug the other end of the RCA connectors into any available line level input jacks on your mixer. If you are playing the CDJ-02 through a receiver, you can plug the RCA connectors into the CD or AUX input jacks on your receiver. If there are no CD or AUX inputs, use any line level (not phono)