• Maintenance • Parts List Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co,, Hoffman Estates, IL 60179 USA Visit the Craftsman web page: ® 972000:597 3-99 • Table Of Contents .......................................................................................................................................... 2 • " _QQ_Ih'Ty'_.::.T..._.,.".:.;::.:2 ...................................................................................................................................... I!

2-11040 Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire Use only with battery pack listed. Personal Safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Dress properly. Do not wear loose clothing or jew

315.115200 13.2 Volt 315.115210 15.6 Volt Save this manual for future reference ,_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 0Q°s 983000-170 12-03 • Warranty .............................................................................................................................

o o @ustemer He_p L_n. t °8@@°843°1682 Safety _nstructions KnstatJation Operation Maintenance Parts List Espa_oi Sears, Roebuck and Co=, Hoffman Estates, mL60179 USA Part No. 1372!910001 GENERAL SAFETY INSTRUCTIONS !4. REMOVE ADJUSTING KEYS AND WRENCHES. SECTION PAGE From the habit of checking to see that keys and BEFORE USING THE DRILL PRESS adjusting wrenches are removed from the t0ol before Warranty ................... " ..... 2 turning "ON". Product Specifications ........... ...............

113.213832 DRILL PRESS WITH 1 4 HP MOTOR N j'M'* • V ,')p ^ " j-tif -'■a, ft“ *' 3' '*'*> 'o.V * tt'i- shf)vl 1 ■ pin"’' fWjl* 'Tl'Xl® dr'd S^'id 'i'Jrr'b(>' n a s*fp p acp'o* 'utu'** ubP CAUTION: R«»d OF.NER* and ADDITION/ ' SAFETY INSTRUCTIONS carefully CRRFTSMRN MOTORIZED 10 INCH BENCH MODEL DRILL PRESS • assembly • operating • repair parts FULL ONE YEAR WARRANTY ON CRAFTSMAN DRILL PRESS H within on« year Oom tha dal« of pure Mm Ihi* Craftaman Or Ml Ptaa* fails dua to a d*ta

4 RULES FOR SAFE OPERATION (Continued) • An extension cord should not be used unless • absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. That extension cord is properly wired and in good electrical condition; and c. That wire size is large enough for AC ampere rating of charger as specified belo

CONSUMER INQUIRES SHOULD DIRECTED TO: ©COPYRIGHT 2006 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810- 840557 – 4-1/2" Corded 3/31/06 COMPONENT #840557 4 1/2" ANGLE GRINDER INSTRUCTION MANUAL THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. IF YOU

Fallowingthis rulewiltreducethe riskof electr_, shock. • For best results, your battery tool shou_ be charged In a location where the temperature Is more than 50°F but less than 100+i:, Do not store outside or invehicles. • Under exhume usage or temperature conditions, battery I_aakags may occur. If liquid comes In contact with your skin, wash Immediately with soap and water, then ceutralize with lemon jules or vinegar. If liquid gets into your eyes, flush them wif_ clean water for at least 10 m

_1= WARNING: Do not insert drill bit into chuck jaws and tighten as shown in figure 7. This could cause ddll bit to be thrown from drill resulting in possible serious personal injury or damage to the chuck. Fig. 7 REMOVING BITS See Figure 6. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 3. • Loosen the chuck jaws from drill bit. • To loosen: grasp and hold the collar of the chuck with one hand, while rotating chuck body with your other han

Fig. 12 TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on the spindle and develop a wobble. To tighten, follow these steps: • Unplug your drill. ,_ WARNING: Failure to unplug your drill could result in accidental starting causing serious; injury. • Open the chuck jaws. • Insert hex key wrench into chuck and tighten chuck jaws securely. Tap hex key wrench sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle. • Open the chuck jaws and remove the hex key