Assessments - 3, GPA: 4 ( )

Fabricante : CDA Arquivo Tamanho: 2.87 mb Arquivo Nome : Língua de Ensino:

– To see the set stop time, follow step 5 up to display “End”. – To cancel automatic cooking at any time, touch the “ ” and “ ” keys simultaneously (for more than 2 seconds) and turn the temperature and function knobs to the off position. When the stop time is reached, the oven will turn off, the timer will beep and “AUTO” will flash: – Touch any key to stop the beeping. – Touch the “ ” key, for more than 2 seconds, to return the oven to the manual mode (“ ” symbol steady illuminated on the display). – Turn the temperature and function knobs to the off position. Attention: After a power failure any automatic program is deleted. Turn off the oven manually. 19 19 Description of the Illuminated Symbols: Symbols Description AUTO flashing Programmer in automatic position but not programmed. AUTO always lit Programmer in automatic position with program set. Automatic cooking taking place. Timer in operation and AUTO flashing Program error. (The time of day lies between the calculated cooking start and end time). Electronic Programmer Models: The electronic programmer is a device that groups together the following SC220.. functions: – 24 hour clock with illuminated display SC510.. – Timer (up to 23 hours and 59 minutes) SC610 – Programme for automatic oven cooking – Programme for semi-automatic oven cooking. Description of the Buttons: Symbols Description Timer Cooking time End of cooking time Manual position and cancellation of the set cooking program To increase the numbers on the digital display To decrease the numbers on the digital display. Note: Select a function by the respective button and, in 5 seconds, set the required time with the / buttons (“one-hand” operation). After a power cut the display resets to zero and cancels the set programs. AUTO Fig. 7 Fig. 8 20 20 Electronic Clock (fig. 8) The programmer is equipped with an electronic clock with illuminated numbers which indicates hours and minutes. Upon immediate connection of the oven or after a power cut, three zeros will flash on the programmer display. To set the correct time of day it is necessary to push the button and then the or button until you have set the correct time. In another way push simultaneously the two buttons and at the same time push the or button. Note: If the clock is reset it deletes any previously set programs. Normal Cooking without the Use of the Programmer To manually use the oven, that is, without the aid of the programmer, it is necessary to cancel the flashing AUTO by pushing the button (AUTO will be switched off and the symbol will go on - Fig. 9). Attention: If the AUTO is steadily lit (which means a cooking program has already been set), the program can be cancelled and switched to manual by pushing the button . If the oven is switched on, you must switch off manually. Electronic Timer The timer program consists only of a buzzer which may be set for a maximum period of 23 hours and 59 minutes. If the AUTO is flashing push the button. To set the time, push the button and the or until you obtain the desired time in the panel (fig. 10). Having finished the setting, the clock hour will appear on the panel and the symbol will be illuminated. The countdown will start immediately and may be seen at any moment on the panel by simply pressing the button . At the end of the time, the symbol will disappear and the buzzer will sound and continue for approximately 7 minutes or until a button is pressed (not the / buttons). After a short time the display will revert back to the time of day. Setting the Frequency of the Audible Signal The buzzer has 3 different tones and can be changed by pressing the button, but only when the time of day is displayed. Fig. 9 Fig. 10 AUTO Fig. 11 Fig. 12 AUTO Fig. 11 Fig. 12 21 Automatic Oven Cooking To cook food automatically in the oven, it is necessary to: 1. Set the length of the cooking time 2. Set the end of the cooking time 3. Set the temperature and the oven cooking program. These operations are done in the following way: 1. Set the length of the cooking period by pushing the button and the decrease if you have passed the desired time (fig. 11). The AUTO and the 2. Set the end of the cooking time by pressing the clock time will appear), and the pushing the button. After this setting, the and a buzzer sounds, it means there was an error in the programming, that is that the cooking cycle has been superimposed on the clock. In this case, modify the end of cooking time or the cooking period itself by following again the above mentioned instructions. 3. Set the temperature and the cooking program by using the switch and thermostat knobs of the oven (see specific chapters). Now the oven is programmed and everything will work automatically, that is the oven will turn on at the right moment to end the cooking at the established hour. During cooking, the symbol remains illuminated. By pushing the button you can see the time that remains until the end of cooking. The cooking program may be cancelled at...

Baixe o seu

Para fazer o download, introduza 2 dígitos :