The fuse is blown. Replace the fuse. No sound. Volume turned down too low. Adjust volume until sound is heard. Wiring not connected properly. Check wiring connections. Operation keys do not work. Microcomputer is not operating properly due to noise. Press RESET. Radio does not work Antenna cable not connected. Insert antenna cable firmly. Automatic station selection does not work. Radio signals are too weak. Select a station manually. Specifications General Power Supply Requirements. . . . . . .

Removing the Unit 1. Turn the ignition off, and disconnect the cable from the battery's negative (-) terminal. 2. Remove the metal strap attached the back of the unit (if attached). 3. Lift the top of the outer trim ring and pull to remove. 4. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, and pull the unit out of the dashboard. JCD3050 Wiring The wiring diagram depicts all the wiring connections required for proper operation of the unit. Red (Rig

• For optimal performance, use CD-R discs with speeds 1x to 8x with write speed 1x to 2x. Use CD-RW discs with speeds 1x to 4x with write speed 1x to 2x. Do not play CD-RW discs that have been written more than five times. Remote Control The optional MWR43 controller can be used to remotely control the features of the radio. Operacion del Cambiador de CD Dirijase al manual del propietario incluido en el cambiador de CD para obtener instrucciones de su instalacion, carga y uso del deposito de CD.

To recall a preset station, press the corresponding preset button momentarily. 17. Automatically Store / Preset Scan Press AS/PS (17) for more than three seconds, and the unit will automatically store the six strongest stations in the current band. When finished, the unit will automatically scan all preset stations. To scan through preset stations at any time, press AS/PS momentarily. The unit will stop at each preset station for several seconds of play. Press AS/PS again to stop scanning and pl

Si se toma unos pocos minutospara leerlo, aprendera como utilizar todas las funcionesde sunuevo radio para su maximo entretenimiento. Funciones del Sistema . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 2Cableado. . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 3Operacion Basica . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .

Touch screen to turn back ON. EJECT: Press to EJECT CD. SOURCE SELECT: Touch to choose current PLAYBACK mode. Basic Operation AUDIO SETUP: Touch to adjustUSER AUDIO SETTINGS. DAY/NIGHT: Press to switch between stored DAY/NIGHT user settings. Touch & hold to access DISPLAY SETUP menu to adjust DAY/NIGHT settings.. MENU: Press to access main USER SETTING MENU. Press & hold to access SYSTEM SETUP MENU. SYSTEM SETUP: Touch tochoose SYSTEM SETUP mode. AUDIO: Press & hold to access AUDIO MENU. Press t

Store a Station Select a band (if needed), then select a station. Press and hold a preset button (5-10) for two seconds. The preset number will appear in the display. Recall a Station Select a band (if needed). Press a preset button (5-10) to select the corresponding stored station. Automatically Store / Preset Scan (AS/PS) Automatically Store Select a band (if needed). Press and hold the AS/PS (15) button for more than three seconds to automatically select six strong stations and store them in

Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. Do not mount radio within close proximity of engine compartment. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system. Protect the Disc Mechanism Avoid inserting any foreign objects into the disc slot. Misuse may cause malfuncti

□ □ H □ □ ES MARINE MSR3007 MARINE AUDIO SYSTEM Installation and Operation Manual Manual de la Instalación y Operación / Guide d'installation et d'opération □ h 0 □ h a CONTENTS Safety Information..............................................................................................1 Installation...........................................................................................................2 Wiring......................................................................

... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... . 1 Installation.. ... ... ... .. ... ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... . 2 Wiring.. ... .. ... ... ... ... .. ... ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... ... ... .. ... ... . 3 Basic Operation . .. . ... ... ... ... ... .. ... ...