The inlet pressure of the gas supply shall be in accordance with the nominal inlet pressure of the regulator used on the range or 1/2 psi {3.5 kPa) pressure maximum. On the factory setting for Natural Gas operation, the pressure regulator will regulate the pressure to 6 inches water column pressure. When set for LP-Propane gas operation, it will regulate the pressure to 10 inches water column pressure. To change the pressure regulator setting: • Unplug the main supply cord of the range. • Un

Pull the ring over the claw-like hook, which is part of the hinge mechanism. Do not forget to do this on both hinges before the next step. (See Figure 10) • Raise the door slightly and pull it straight out and away from the oven. The door will come" completely off. • When replacing the door, locate it back into the hinge holes. Pull it down fully and slip the rings off the claw-like hooks. Figure 10 Close the door and make sure that it sits in place fully. If not, repeat all above steps. >

30 min.) after they have been switched off. - Scrupulously follow the cleaning instructions. - Do not drop heavy or sharp objects on the glass ceramic cooktop. - Never cook the food directly on the glass ceramic cooktop, but in special pans or containers. Figure 9 Make sure that the handles of cookware do not stick out over the edge of the range, to avoid them being knocked over by accident. This also makes it more difficult for children to reach the cooking pots/pans. 10 HOW TO USE THE N

If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance. FIRST, contact the people who serviced your Gas Range. Explain why you are not pleased. In most cases, this will solve the problem. NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to: Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 PARTS & FEATURES 1 Cooktop 2 Control Panel 3 Oven Door Handle 4 Oven Do

Before beginning, please read these instructions completely and carefully. . Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. . Please observe all local and national codes and ordinances. . Please ensure that this product is properly grounded. . The installer should leave these instructions with the consumer who should retain for local inspector's use and for future reference. Installation must conform with local codes or in the absence

• 9 HOW TO USE THE TOP BURNERS Figure 6 CHOICE OF BURNER (fig. 6) The symbols printed on the panel above the gas knobs indicate the correspondence between the knob and the burner. The most suitable burner is to be chosen according to the diameter and volume capacity of the container to be warmed. It is important that the diameter of the pots or pans suitably match the heating potential of the burners in order not to jeopardise the efficiency of the burners, bringing about a waste of gas f

With the purchase of your Avanti appliance, you can have the confidence that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you. Just call us toll-free. AVANTI PRODUCTS CUSTOMER SERVICES Product Information 800-323-5029 Whatever your questions are about our products, help is available. Part Orders 800-220-5570 You may order parts and accessories that will be delivered directly to your home by personal check, money order, Master C

Always position the utensil on the burner grate before lighting the burner. For your safety, the flame should not extend beyond the sides of the pan. Any flame larger than the bottom of the cookware is wasted and only heats the handle. • To turn the burner off, turn the knob clockwise until it reaches the (•) symbol. • Before lighting a burner. Make sure all grates on the range are in place before using any burner. • After the burner ignites, turn the knob to adjust the flame size. Watch the

Replacement parts are available from factory authorized parts distributors. Contact the nearest AVANT I parts distributor in your area. 8 HOW TO USE THE VITROCERAMIC HOB Figure 4 VITROCERAMIC HOB The ceramic surface of the hob allows a fast transmission of heat in the vertical direction, from the heating elements underneath the ceramic glass to the pans set on it. The heat does not spread in a horizontal direction, so that the glass stays “cool’' at oniy a few centimeters from the cooking