Instruções de Operação Samsung, Modelo SCX-3400F/ETS
1 From the Samsung website, download and unpack the UNIX Printer Driver package to your computer. 2 Acquire root privileges. “su -” 3 Copy the appropriate driver archive to the target UNIX computer. See administration guide of your UNIX OS for details. Unpack the UNIX printer driver package. 4 For example, on IBM AIX, use the following commands. “gzip -d < enter the package name | tar xf -” Go to the unpacked directory. 5 Run the install script. 6 “./install” install is the installer script file which is used to install or uninstall the UNIX Printer Driver package. Use “chmod 755 install” command to give the permission to the installer script. Execute the “. /install –c” command to verify installation results. 7 Run “installprinter” from the command line. This will bring up the Add 8 Printer Wizard window. Setup the printer in this window referring to the following procedures. 2. Using a Network-Connected Machine 150 Installing driver over the network Installing driver over the network On some UNIX OS, for example on Solaris 10, just added printers may not be enabled and/or may not accept jobs. In this case run the following two commands on the root terminal: “accept ” “enable ” Uninstalling the printer driver package The utility should be used to delete the printer installed in the system. a Run “uninstallprinter” command from the terminal. It will open the Uninstall Printer Wizard. The installed printers are listed in the drop-down list. b Select the printer to be deleted. c Click Delete to delete the printer from the system. d Execute the “. /install –d” command to uninstall the whole package. e To verify removal results, execute the “. /install –c” command. To re-install it, use the command “. /install” to reinstall the binaries. Setting up the printer To add the printer to your UNIX system, run ‘installprinter’ from the command line. This will bring up the Add Printer Wizard window. Setup the printer in this window according to the following steps: Type the name of the printer. 1 Select the appropriate printer model from the model list. 2 Enter any description corresponding to the type of the printer in the 3 Type field. This is optional. Specify any printer description in the Description field. This is optional. 4 Specify the printer location in the Location field. 5 Type the IP address or DNS name of the printer in the Device textbox for 6 network-connected printers. On IBM AIX with jetdirect Queue type, only the DNS name is possible-numeric IP address is not allowed. Queue type shows the connection as lpd or jetdirect in the 7 corresponding list box. Additionally, usb type is available on Sun Solaris OS. Select Copies to set the number of copies. 8 Check the Collate option to receive copies already sorted. 9 Check the Reverse Order option to receive copies in the reverse order. 10 2. Using a Network-Connected Machine 151 Installing driver over the network Installing driver over the network Check the Make Default option to set this printer as default. 11 Click OK to add the printer. 12 2. Using a Network-Connected Machine 152 IPv6 configuration IPv6 is supported properly only in Windows Vista or higher. • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7 or "Menu overview" on page 33). • If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again using Clear Setting. In the IPv6 network environment, follow the next procedure to use the IPv6 address. From the control panel Connect your machine to the network with a network cable. 1 Turn on the machine. 2 Print a Network Configuration Report that will check IPv6 addresses 3 (see "Printing a network configuration report" on page 141). Select Start > Control Panel > Printers and Faxes. 4 Click Add a printer in the left pane of the Printers and Faxes windows. 5 Click Add a local printer in the Add Printer windows. 6 The Add Printer Wizard window appears. Follow the instructions in the 7 window. If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by. Activating IPv6 Press the (Menu) button on the control panel. 1 Press Network > TCP/IP (IPv6) > IPv6 Activate. 2 Select On and press OK. 3 Turn the machine off and turn it on again. 4 Reinstall your printer driver. 5 2. Using a Network-Connected Machine 153 IPv6 configuration Setting IPv6 addresses The machine supports the following IPv6 addresses for network printing and managements. • Link-local Address: Self-configured local IPv6 address (Address starts with FE80). • Stateless Address: Automatically configured IPv6 address by a network router. • Stateful Address: IPv6 address configured by a DHCPv6 server. • Manual Address: Manually configured IPv6 address by a user. DHCPv6 address configuration (Stateful) If you have a DHCPv6 server on your network, you can set one of the following options for default dyna...
)
