Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
• See "Machines without a display screen" on page 161. Using the menu button ( ) • See "Using the menu button" on page 162. 2. Using a Network-Connected Machine 157 Wireless network setup Set up method Connecting method Description & Reference Access point via USB cable (recommended) ( ) • Windows user, see "Access point via USB cable" on page 163. • Macintosh user, see "Access point via USB cable" on page 172. From the computer Access point via WPS button (without a USB cable connection) ( , ) • Windows user, see "Access point via WPS button (without a USB cable connection)" on page 167. • Macintosh user, see "Setting the access point using the WPS button" on page 176. Ad hoc via USB cable ( ) • Windows user, see "Ad hoc via USB cable" on page 169. • Macintosh user, see "Ad hoc via USB cable" on page 178. Using a network cable • See "Using a network cable" on page 180. Other set up methods Setting the Wi-Fi Direct for mobile printing • See "Setting up Wi-Fi Direct" on page 183. If problems occur during wireless set up or driver installation, refer to the troubleshooting chapter (see "Troubleshooting" on page 185). 2. Using a Network-Connected Machine 158 Wireless network setup Using the WPS button If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by pressing the (WPS) button on the control panel without a computer. • If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using. • When using the WPS button to set the wireless network, security settings may change. To prevent this, lock the WPS option for the current wireless security settings. The option name may differ depending on the access point (or wireless router) you are using. Items to prepare • Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS). • Check if your machine supports Wi-Fi Protected Setup™ (WPS). • Networked computer (PIN mode only) Choosing your type There are two methods available to connect your machine to a wireless network using the (WPS) button on the control panel. The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the (WPS) button on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router) respectively. The Personal Identification Number (PIN) method helps you connect your machine to a wireless network by entering the supplied PIN information on a Wi- Fi Protected Setup™ WPS-enabled access point (or wireless router). Factory default in your machine is PBC mode, which is recommended for a typical wireless network environment. You can change the WPS mode in control panel ( (Menu) > Network > Wireless > OK > WPS Setting). 2. Using a Network-Connected Machine 159 Wireless network setup Machines with a display screen Connecting in PBC mode Press and hold the (WPS) button on the control panel for more than 1 2 seconds. The machine starts waiting for up to two minutes until you press the WPS (PBC) button on the access point (or wireless router). Press the WPS (PBC) button on the access point (or wireless router). 2 The messages are displayed on the display screen in the order below: a Connecting: The machine is connecting to the access point (or wireless router). b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. c AP SSID: After completing the wireless network connection process, the AP’s SSID information appears on the display. Connecting in PIN mode Press and hold the (WPS) button on the control panel for more than 1 2 seconds. The eight-digit PIN appears on the display. 2 You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router). The messages are displayed on the display screen in the order below: a Connecting: The machine is connecting to the wireless network. b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. c SSID Type: After completing the wireless network connection process, the AP’s SSID information is displayed on the LCD display. 2. Using a Network-Connected Machine 160 Wireless network setup Machines without a display screen Connecting in PBC mode Press and hold the (WPS) button on the control panel for about 2 - 4 1 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless rou...
Este manual também é adequado para os modelos :Impressoras - SCX-3206W (7.97 mb)
Impressoras - SCX-3400 (7.97 mb)
Impressoras - SCX-3400/ALG (7.97 mb)
Impressoras - SCX-3400/STS (7.97 mb)