The 1154B is designed to switch high definition component video up to 1080p and audio signals including stereo (analog), digital coaxial, and digital optical audio, all delivered to the viewer with their original vividness, brightness, and clarity. The 1154B includes automatic cross-conversion between digital audio formats, outputting both, and a defeatable AutoSelect logic automatically chooses the active source. Manual control is available via IR remote with discretes (included) or touch-sensi

The Model 1185ci is the first Audio Authority distribution amp expressly designed for Custom Installers of Home Theater systems. It includes the most-asked-for features, such as ultrawide video bandwidth, audio channels that also pass sync for RGBHV displays, and full optical/ coaxial support of digital audio with automatic conversion. Housed in a durable steel enclosure, the Model 1185ci also has side-looking input and output jacks for extra compact cable routing. Audio Authority also offers an

If you find any items are missing, contact Audio Authority immediately. Have the Model Number, Serial Number and Invoice available for reference when you call. 4.0 CONNECTING THE HARDWARE Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements. Model 1311 DVI + Digital Audio to HDMI Converter Model 1312 HDMI to DVI + Digital Audio Converter 5.0 OPERATING THE UNIT Before installation, please make sure all devices you wish to connect hav

• To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. • This product must be installed by qualified personnel. • Do not open the cover—there are no user-serviceable parts inside. • Do not expose this unit to excessive heat. • Install only in dry, indoor locations. • Clean the unit only with a dry or slightly dampened soft cloth. LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. Audio Authority cannot be held liab

See Appendix A for other system related connections such as System Bus, DC distribution, or Low-Level and High-Level Bus. Amp (position. #4) DC Connections Switched + (Blue) Battery (Yellow) Ground (Black) 916X DC Power Adapter JTON! BEFORE SERVICING. 916X T01 ©2 ©3^)4^ System Bus Connections Settings for Bypass & Amp Turn On Delay Address Settings Low Level Bus Connections < (IN & OUT) ^ High-Level Bus Connections ■ Audio Signal Expansion Port Amp Bypass Note: This amp could not b

The GROUP address should be higher than the highest speaker GROUP address. The mono subwoofer bus cable connects to the stereo jacks with a “Y” adapter. Instructions for other types of subwoofer configurations are available if needed. Contact our Sales department at the phone number below. Write in switch settings in each boxs Setting for Bypass Group Number Setting System Bus Connections Model 922 Stereo Low-Level Selector Do Not Use these ports in Home-Audio Applications “Y” Cable for b

To demonstrate receivers with more than two channels, see the drawing for Dolby Digital and ProLogic Receivers. Instructions for other types of two-channel receiver or amplifier configurations are available if needed. Contact your Account Manager at the phone number below. System Bus Connections Do Not Use these ports in Home-Audio Applications All switches OFF (Used in car audio only) Group Number Setting Module ID Settings Stereo Audio Low Level Input Bus Connections (Input from source)

If a receiver does not have some of the features shown, simply leave those jacks or terminals vacant on the 947. Always connect the A/V cables to the VCR 1 or Video 1 jacks on the receiver. To prevent a blank screen when switching from a GUI reciver to a non-GUI receiver, you should install a 986 Video AutoPatcher in your system. There is no optical digital connection on the 947 - use the coax input on digital audio receivers, or use Model 977T Coax to Optical Adapter. Instructions for other typ

It makes no difference if selection of product is by Control Panel or by Product Select Buttons or both, therefore, always follow this diagram for proper setup. Concerning signal path, the Model 980EZ will be located just before the amplifier inputs (see Appendix A). In the 2-channel configuration, the Front Inputs and Front Outputs are the only connections that are used. In the 6-channel configuration, all three sets of inputs/outputs are used. The Low-Level buses (e.g., front, rear, sub) conti

Like other members of the 985 family, 985DTV modules can be cascaded to allow virtually an unlimited number of television monitors to be driven from a single source without picture degradation. The exceptional bandwidth of this product supports video standards from today on into the future. The 985DTV can also be used for RGB video distribution in video production and duplication facilities. Digital audio distribution complements the 985DTV's video capability by providing lossless transmission