By allowing you to convert even the highest bit rate digital signals from coax to optical or vice versa, Audio Authority's digital audio converters provide maximum fidelity and compatability. 977T coaxial input Model 977RPO Digital Optical to Digital Coaxial Converter The 977R (Receiver) converts the optical audio output of a digital source (DVD player or satellite receiver) to coax for connection to Dolby Digital® or DTS® receivers. 977RPO FEATURES & SPECIFICATIONS: • Reliably converts di

The 1154B is designed to switch high definition component video up to 1080p and audio signals including stereo (analog), digital coaxial, and digital optical audio, all delivered to the viewer with their original vividness, brightness, and clarity. The 1154B includes automatic cross-conversion between digital audio formats, outputting both, and a defeatable AutoSelect logic automatically chooses the active source. Manual control is available via IR remote with discretes (included) or touch-sensi

Connect bus jacks for all channels whether or not they will be used. Pull two cables to each wallplate location, preferably using a different colored cable jacket for A and B cables. Install an RJ-45 termination on each end of every Cat 5 cable, using EIA-568B pairing (pins 12, 3-6, 4-5, 7-8). If possible, use EZ RJ-45 connectors. Check each cable with a network cable tester – CONTINUITY TESTING IS NOT ADEQUATE – the pairs must match the EIA-568B color code. WHT / ORNORNWHT / GRNBLUWHT / BLUGRNW

Adjust the cable length compensation if the cable between the Driver and the wallplate/receiver is over 100 feet long. Set the compensation at 1 for cables 100-199 ft. long, and 2 for 200-299 ft. cables, etc. Do not permanently mount the wallplate/receivers until after system testing. Carefully connect the A and B cables to the Driver(s), power the source components, TVs and AV receivers, and plug in 9871 power supplies to test the system. Connect a TV to each wallplate/receiver location to refi

The buffered Cat 5 bus outputs on each 9871 drive one or two wallplate/receivers. To expand output capacity of the system, connect together an unlimited number of 9871 Drivers using Kit 46, included with each Driver. High quality RCA patch cables can also be used for expansion. One power supply required RCA INPUT Cat 5, Cat 5e, or Cat 6 Cable A BA BANALOG AUDIODIGITAL AUDIOCOMPONENT VIDEOConnect all bus jacks including IR (Kit 46 shown) A B Note: This configuration of three 9871 Drivers could su

Component video (YPbPr), analog stereo audio, and digital audio (coaxial) sigals are included in each two-cable Cat 5 pathway. By connecting IR remote control systems to the DuoDrive system, users can easily control the source equipment from other rooms in the house. IR receiver and emitter products are not included with the DuoDrive. System Design The DuoDrive is comprised of one Model 9871 RCA-to-Category 5 Driver and two Model 9879 wallplate/receivers. (Two other Cat 5 receiver styles are als

Install an RJ-45 termination on each end of every Cat 5 cable, using EIA-568B pairing (pins 12, 3-6, 4-5, 7-8). If possible, use EZ RJ-45 connectors. Check each cable with a network cable tester – CONTINUITY TESTING IS NOT ADEQUATE – the pairs must match the EIA-568B color code. WHT / ORNORNWHT / GRNBLUWHT / BLUGRNWHT / BRNBRN CATEGORY 5,5e or 6 CABLE Note: EIA 568A or B standard may be used. (B is pictured here.) Make sure both ends are terminated with the Category 5 Connector Termination This

If you find any items are missing, contact Audio Authority immediately. Have the Model Number, Serial Number and Invoice available for reference when you call. 4.0 CONNECTING THE HARDWARE Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements. Model 1311 DVI + Digital Audio to HDMI Converter Model 1312 HDMI to DVI + Digital Audio Converter 5.0 OPERATING THE UNIT Before installation, please make sure all devices you wish to connect hav

Consisting of an 1171 MultiDriver and six 9879 Wallplate Receivers, the AVM-71 system distributes component video at resolutions up to 1080p, as well as both digital and analog audio, over two inexpensive, easy-to-install Cat 5 cables from a single source to each of six outputs. 1170 Multidriver Expanders and additional Wallplate receivers can be added to expand system capacity to a maximum of 42 zones. Audio Authority's Active Gain Equalization (AGE) technology and unique cable length compensat

• To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. • This product must be installed by qualified personnel. • Do not open the cover—there are no user-serviceable parts inside. • Do not expose this unit to excessive heat. • Install only in dry, indoor locations. • Clean the unit only with a dry or slightly dampened soft cloth. LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. Audio Authority cannot be held liab