WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the appliance. WHAT TO DO IF YOU SMELL GAS Do not try to light any appliance. Do not touch any ele

Note: when tightening the connection, make sure you hold it firmly in position (eg by using adjustable pliers or an adjustable wrench) and take care not to damage the thread. 2 Connect the extension pipe to the elbow: Mount the extension pipe to the elbow connection, making sure you place the supplied washer between them. Note: when tightening the connection, make sure you hold it firmly in position (eg by using adjustable pliers or an adjustable wrench) and take care not to damage the thread. 3

Once properly set in Sabbath mode, SAb wiii show in the oven display until the Sabbath mode is cancelled. NOTE You may press STOP any time when setting the control or during the cooking process. Cancelling Sabbath mode The example below shows how to cancel the Sabbath mode. 1. Press and hold both the COOK TIME and DELAY START keys together for 3 seconds (a beep wiii sound) and release. 2. Aii cooking features previously set will automatically cancel once Sabbath mode has ended. NOTE The only key

Rinse agent gives a streak free, sparkling clean look to glass and chinaware, in addition it prevents metal from tarnishing. The rinse agent dispenser is on the inside of each drawer, located underneath the detergent dispenser. The dispenser holds approximately 1.7 fl oz (50 ml) of rinse agent. Filling the rinse agent dispenser 1 Turn the plug counter-clockwise and remove. 2 Pour the rinse agent into the circular opening. 3 Take care not to spill rinse agent into the DishDrawer®. Any spillages m

Run the DishDrawer® through a wash program. US CA US CA 26 Fault codes How to recognize a fault code When a fault has occurred, the DishDrawer® will continuously beep every second. The fault code will be displayed on the wash program selector. Each fault code is shown in the following chart. How to attend to a fault code 1 Press the button to remove the fault code. 2 If the fault code and continuous beeps cannot be removed by pressing the button, turn the DishDrawer® off at the power supply. 3 W

Tel: +33–(0)1-6446-5201 Fax: +33–(0)1-6446-5221 USA: Suite 101 22982 Alcalde Drive, Laguna Hills, California 92653, USA Tel: +1-(949)-470-3900 Fax: +1-(949)-470-3933 Toll Free: (800)-446-3908 UK and Ireland(European Authorised Representative): Unit 16, Cordwallis Park Clivemont Road, Maidenhead, SL6 7BU, United Kingdom Tel: +44-(0)1628626 136 Fax: +44-(0)1628626 146 MR850 Technical Manual * Revision J * Issued November 2005 * Ref. 185041340 (185041713 internal) TABLE OF CONTENTS 1 INTRODUCTION .

2 IMPORTANT SAFETY INSTRUCTIONS ..................................... 3-5 Protection Agreements ............................................................ 6 Before Using Your Range .......................................................... 7 Assembly of Burner Heads, Caps & Grates ....................... 7 Range Features ......................................................................... 8 Before Setting Oven Controls .............................................. 9-1 O Before Setting Su

SAb will disappear from the display. 30 Setting Oven Controls • Setting the Sabbath Day Feature (cont'd) • Setting the Warm & Hold TMFeature It is recommended that any oven temperature change with the Sabbath feature activated be followed with 2 presses of the START pad. This will insure the oven remains ON even if the attempt to set the oven temperature was lower or higher than the oven control can accept. If the oven temperature is set incorrectly, the oven temperature will default to 170°F or

SAFETY AND WARNINGS WARNING! Electrical hazard Before installing the DishDrawer®, remove the house fuse or open the circuit breaker. If permanently connecting the DishDrawer®, be sure the power is isolated and the DishDrawer® unplugged. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equ