La Crosse Technology®y® Heavy WeatherPro Software User’s Guide (for 2800 series weather stations with USB connectivity) Revision: 1.3 CONTENTSCONTENTS Contents ........................................................................................................................................................................2 Overview..................................................................................................................................................................

To install and replace the batteries, please follow the steps below: 1. Pull down on the tab at the top of the battery cover and lift up to remove the cover. 2. Insert batteries observing the correct polarity (see marking inside battery compartment) . 3. Replace compartment cover. DO NOT SET THE CLOCK. SETTING UP: Alkaline batteries are recommended for use. Avoid using rechargeable batteries. 1. Place batteries in the atomic clock. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES. 2. After 15 minutes the

After unpacking the device, immediately check to determine that all listed items are present and that the device is in a faultless condition. Remove all packagng materials and the protective foil from the display. Operating Elements q Projection lens w Telescopic antenna e Switch ALARM ON/OFF/AUTO r Button SNOOZE t Waveband selector FM/AM y Button PROJECTION LIGHT, Display illumination u Switch PROJECTION ON/OFF i Display o Sound volume regulator OFF/BUZZ/VOLUME a Connection for 3V power adapter

Pass this manual on to whoever might acquire the device at a future date. - 1 PROJECTION ALARM CLOCK KH2198/99 Safety information To avoid potentially fatal injury through electric shock: • Only use the device in dry rooms. • Never allow fluids or objects to penetrate into the device. • Do not place objects containing fluids, e.g. flower vases, on the device. To avoid burn and other injuries: • Place the device in an open and well-ventilated area so that heat pockets cannot be created within i

1 Projection clock with radio, 1 Operating manual The batteries and a 3V-mains adaptor (accessories), required for operation, are not included in the supply. Operating Elements q Projection lens w Telescopic antenna e Button Snooze r Projection, Display illumination t Display y Frequency scale u Button Alarm i Button Hour o Button Time a Button Min (Minute) s Loudspeakers d Projection focus f Tuning wheel g Volume controller VOLUME / BUZZ h External 3V Direct current connection for 4.0 mm x 1.7

- 3 IB_KH2201_02_AR909_UK_4.qxd 12.11.2007 13:10 Uhr Seite 4 PROJECTION CLOCK Safety instructions To avoid fatal injury through electric shock: • Use the clock in dry environments only. • Make sure that fluids or any other objects do not get inside the device. • Do not place objects containing fluids, e.g. flower vases, on the appliance. To avoid burn and other injuries: • Place the appliance in an open and well-ventilated area so that heat pockets cannot be created within it. Never cover the

CV_KH2201_02_AR909_LB3 12.11.2007 11:08 Uhr Seite 1 KOMPERNASS GMBH · BURGSTRASSE 21 D-44867 BOCHUM ID-Nr.: KH2201_02-10/07-V2 PROJECTION CLOCK KH 2201 KH 2202 3 PROJECTION CLOCK Operating instructions PROJEKTIONSUR Betjeningsvejledning PROJEKSJONSKLOKKE Bruksanvisning NIEIU-.NIAIEEAO Iaca.ao .n.oco PROJEKTIONSUHR Bedienungsanleitung h h CV_KH2201_02_AR909_LB3 12.11.2007 11:09 Uhr Seite 5 KH 2201 KH 2202 wu qwe r e t y r u i o a a 2) j d f ; k q g h g ; s j d s kl o ty f IB_KH2201_02_AR909_UK_3.

If no signal is found during this period, the tower icon will not appear and the clock will search again at 12:00 am the next night. PROGRAM MODE To enter the Program Mode hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower left. The Program Mode Guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the Projection alarm. Complete programming is usually done for the ini

To install and replace the batteries, please follow the steps below: 1. Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover. 2. Insert batteries observing the correct polarity (see marking inside battery compartment). 3. Replace compartment cover. DO NOT SET THE CLOCK. TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please

ADDITIONAL EQUIPMENT (not included) 1) Three fresh 1.5V AA batteries (optional for alarm clock) 2) Two fresh 1.5V AA batteries (for remote transmitter) ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time signal continuously throughout the United States at 60 kHz. The signal can be received up to 2, 000 miles away through the internal antenna in