The ES4650 provides 48 fixed 1000MB port (4 of which are fixed 1000MB Combo fiber cable port/copper cable ports) and 2 10GB XFP ports. ES4626/ES4650 can seamlessly support various network interfaces from 100Mb, 1000Mb to 10Gb Ethernets. We are providing this manual for your better understanding, usage and maintenance of the ES4626/ES4650. We strongly recommend you to read through this manual carefully before the installation and configuration to avoid possible damage and malfunction to the switc

• Verify port group is configured in the partner end, and in the same configuration. If the local end is set in manual aggregation or LACP, the same should be done in the partner end; otherwise part aggregation will not work properly. Another thing to note is that if both ends are configured with LACP, then at least one of them should be in ACTIVE mode, 269 otherwise LACP packet wouldn’t be initialed. • LACP cannot be used on port enabled Security and 802.1x, therefore it cannot be enabled if th

Figure 3-96 Service Policy Settings CLI - This example applies a service policy to an ingress interface. Console(config)#interface ethernet 1/5 4-143 Console(config-if)#service-policy input rd_policy#3 4-225 Console(config-if)# Multicast Filtering Multicast Filtering Multicasting is used to support real-time applications such as videoconferencing or streaming audio. A multicast server does not have to establish a separate connection with each client. It merely broadcasts its service to the netwo

ES4710BD provides 10 slots, with support for various types of line cards and can seamlessly support a variety of network interfaces from 100Mb, 1000Mb to 10Gb Ethernet. We are providing this manual for your better understanding, use and maintenance of the ES4710BD. We strongly recommend you to read through this manual carefully before installation and configuration to avoid possible malfunction or damage to the switch. Furthermore, we sincerely hope our products and services satisfy you. 1 ES471

Frequent changes in the tree structure can easily isolate some of the group members. MSTP (an extension of RSTP) is designed to support independent spanning trees based on VLAN groups. Once you specify the VLANs to include in a Multiple Spanning Tree Instance (MSTI), the protocol will automatically build an MSTI tree to maintain connectivity among each of the VLANs. MSTP maintains contact with the global network because each instance is treated as an RSTP node in the Common Spanning Tree (CST).

This creates one spanning tree instance for the entire network. If multiple VLANs are implemented on a network, the path between specific VLAN members may be inadvertently disabled to prevent network loops, thus isolating group members. When operating multiple VLANs, we recommend selecting the MSTP option. • Rapid Spanning Tree Protocol RSTP supports connections to either STP or RSTP nodes by monitoring the incoming protocol messages and dynamically adjusting the type of protocol messages the

It includes a management agent that allows you to configure the features listed in this manual. The default configuration can be used for most of the features provided by this switch. However, there are many options that you should configure to maximize the switch's performance for your particular network environment. Key Features Table 1-1. Key Features Feature Description Configuration Backup and Restore Backup to TFTP server Authentication Console, Telnet, web - User name / password, RA

Using the switch's command-line interface (CLI) is very similar to entering commands on a UNIX system. Console Connection To access the switch through the console port, perform these steps: 1. At the console prompt, enter the user name and password. (The default user names are “admin” and “guest” with corresponding passwords of “admin” and “guest.”) When the administrator user name and password is entered, the CLI displays the “Console#” prompt and enters privileged access mode (i.e., Privileged

Powered by Accton 24/48 10/100 Ports + 2GE Intelligent Layer 2 Management Guide Fast Ethernet Switch Management Guide Management Guide Fast Ethernet Switch Layer 2 Standalone Switch with 24/48 10/100BASE-TX (RJ-45) Ports, and 2 Combination Gigabit Ports (RJ-45/SFP) ES3526XA ES3552XA F2.2.6.3 E122006-CS-R02 149100005500H Contents Chapter 1: Introduction 1-1 Key Features 1-1 Description of Software Features 1-2 System Defaults 1-5 Chapter 2: Initial Configuration 2-1 Connecting to the Switch 2-1 C

• Add – Adds a new VLAN group to the current list. • Remove – Removes a VLAN group from the current list. If any port is assigned to this group as untagged, it will be reassigned to VLAN group 1 as untagged. Adding Static Members to VLANs (VLAN Index) 23 Web – Click VLAN, 802.1Q VLAN, Static List. To create a new VLAN, enter the VLAN ID and VLAN name, mark the Enable checkbox to activate the VLAN, and then click Add. Figure 23-4 VLAN Static List - Creating VLANs CLI – This example creates a new