2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades wi

The Remote TV is also referred to as “TV2.” You can tell your receiver is in Dual Mode because the Mode front panel indicator will light and the menu and other screens will display Dual Mode (as shown below). Chapter 2 14 Dual and Single Modes Single Mode Single Mode provides dual-tuner receiver features—like Picture-in-Picture (PIP) and the ability to watch one live program while recording another—to all connected TVs. Single Mode delivers the same programming to all of the TVs connected to the

If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention. For Your Safety Important Software Notice As with all software controlled products, unexpected behavior could arise if the user tries to perform operations in a nonroutine manner. This product, like almost any other high tech product, is subject to bugs and hence EchoStar CANNOT AND DOES NOT GUARANTEE OR WARRANT THAT ALL FEATURES, SUCH

• Install a DSL filter between the receiver and the telephone wall jack. 093 • You may have set up the receiver to reset itself back to the “factory defaults,” that is, the settings it had when it was shipped from the factory. • If you want to reset the receiver to its factory default settings, select the Yes option. If not, select the No option. What’s Happening What’s Wrong What You Can Do When you run Check Switch, you do not see "Twin" identified as a Device or LNBF. All entries show "X"s. •

If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention. The WARNING! symbol means that if you are not careful, You could injure or kill yourself, or You could damage equipment or property. The ATTENTION! symbol means you should pay special attention to: Important instructions for using the system, or Important instructions for maintaining the system. The Class II Symbol alerts qualified ser

Reviewing Purchase History Press MENU-6-5 to open the Purchase History screen. This screen shows a list of events you’ve purchased, including those you have watched and those you purchased but have not yet watched. Using Favorites Lists Favorites Lists are lists of your favorite channels. You can create and change the lists yourself, adding and removing channels as you wish. Your favorite channels can be grouped into no more than four lists for both TV1 and TV2 (in Dual Mode). For example, one F

As an added bonus, if you find out that you don’t like how it turned out, you can reset the receiver to the way it was when you got it. Here’s what’s in this chapter: • USING CALLER ID • CHANGING LANGUAGES • USING CLOSED CAPTIONING • USING DOLBY ® SURROUND SOUND • CHANGING THE PROGRAM GUIDE ORDER • CHANGING THE GUIDE DISPLAY • RESETTING TO FACTORY DEFAULTS • SCHEDULING RECEIVER UPDATES Chapter 10 60 Using Caller ID USING CALLER ID Caller ID displays on your TV the names of people and/or telephon

• PCM Only - Select this option only if the stereo system or amplifier cannot decode Dolby Digital signals. • Dolby Digital/PCM - Select this option only if the stereo system or amplifier can decode both Dolby Digital and Linear PCM signals. The audio output is also dependent on what is present in the program you are watching. The table below shows what type of output you will hear: Signal Present in Program Optical Output Setting Dolby Digital PCM Both Dolby Digital Only Dolby Digital PCM Dolby