#ts10556 printed in taiWan .........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement and other masonry products. • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: Work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Table o

This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and comprehension, application of safety devices, blade/cutter integrity, and the usage of personal protective equipment. The manufacturer will not be held liable for injury or property damage from negligence, improper training, machine modifications or misuse. ▲ WARNING! Some dust created by power sand

#Cr11784 printed in China. table of contents section 1: safety.......................................................................................................4 safety instructions for pneumatic tools.....................................................................5 additional safety instructions for hVhp spray guns.................................................6 section 2: introduction .........................................................................................7 section

2. Insert the battery into the charger. The battery fits into the oval recess in only one way. Do not force the battery. Insert until it locks into place. Note: Allow the battery to cool down before charging. After charging is completed, allow the battery to cool down before installing it in the drill. 3. The red light will come on (Models H7792/3 will blink slowly) when the battery is charging. Charge the battery for 1 hour or until the charging light turns green (Models H7794/5) or blinks rapi

Make sure operation instruc-wrenches before turning machinery tions are safe and clearly under-ON. stood. 18. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS BEFORE USING MACHINERY. AWAY. Keep all children and visi-Check for binding and alignment tors a safe distance from the work of parts, broken parts, part mount- area. ing, loose bolts, and any other conditions that may affect machine 9. MAKE WORKSHOP CHILD operation. Repair or replace dam- PROOF. Use padlocks, master aged parts. switch

#EW7591 PRINTED IN CHINA Table of Contents INTRODUCTION...............................................................................................................2 Foreword.....................................................................................................................2 Contact Information ....................................................................................................2 Machine Data Sheet.................................................................

Models G4200–G4207, & H1266–H1271 Hex Power Bits These hex shaft bits are available in 1" and 2" lengths , so they work directly in the chuck or in quick change bit holders. Figure 6.Hex power bits. G8865—Cobalt Alloy Drill Bits 13-PC. G8866—Cobalt Alloy Drill Bits 21-PC G8867—Cobalt Alloy Drill Bits 29-PC Cobalt Alloy bits will retain their edge sharpness longer than normal HSS bits, resulting in a significant saving of time and money in the workshop. Includes a heavy- gauge steel index case fo