The audio levels for this input are controlled by the microphone controls on the top panel. 3. LINE | PHONO INPUTS (RCA) – Connect your audio sources to these inputs. These inputs can accept both line and phono-level signals. 4. LINE INPUTS (RCA) – Connect line-level devices, such as CD players, samplers or audio interfaces, to these inputs. 5. LINE | PHONO SWITCH – Flip this switch to the appropriate position, depending on the device connected to the LINE | PHONO INPUTS. If you are using phono-

With a ground-breaking and easily accessible user interface, the plug and play design empowers the DJ to quickly find, organize and perform tracks from connected USB storage devices. Songs can be directed manually to decks or automatically played, jukebox-style. Powerful tools such as the Crate and Profile View offer a digital slant on traditional DJ methods. The Crate can be used to prepare and arrange your set in advance, during your performance or a mixture of both. The Profile View offers a

4. LINE INPUTS (RCA) – Connect line-level devices, such as CD players, samplers or audio interfaces, to these inputs. 5. PHONO INPUTS (RCA) – Connect phono-level devices, such as turntables, to these inputs. 6. GROUNDING TERMINAL – If you are using phono-level turntables with a grounding wire, connect the grounding wire to these terminals. If you experience a low “hum” or “buzz”, this could mean that your turntables are not grounded. Note: Some turntables have a grounding wire built into the RCA

MANUAL DE INICIO RAPIDO ESPANOL ( 5 – 7 ) .. GUIDE D’UTILISATION RAPIDE FRANCAIS ( 9 – 11 ) .. MANUALE RAPIDO DI UTILIZZAZIONE ITALIANO ( 13 – 15 ) .. KURZANLEITUNG DEUTSCH ( 17 – 19 ) .. QUICKSTART GUIDE ENGLISH ( 1 – 3 ) .. MANUAL DE INICIO RAPIDO ESPANOL ( 5 – 7 ) .. GUIDE D’UTILISATION RAPIDE FRANCAIS ( 9 – 11 ) .. MANUALE RAPIDO DI UTILIZZAZIONE ITALIANO ( 13 – 15 ) .. KURZANLEITUNG DEUTSCH ( 17 – 19 ) 1 NORMAL FILTERS FLANGER AUTOPAN L R AUTOCUT FILTERED LOPASS VARI-CUT RATE RATE BOX CONTE

If a mixer is placed between two turntables make sure that there is at least ." (7mm) between the mixer and the turntables to prevent damage to the turntables and to reduce unwanted system noise. Mixer Mixer 85 mm ." ." Mixer ." ." Setup Style 1 (traditional) Best For: Long mixes and blending techniques Setup Style 2 (battle style, scratching) Mixer Best For: Scratching, cutting, and aggressive mixing techniques There are many variations of these setups. Find the best setup that works for your m

13. Cue Mix Control – Adjusts the headphone blend of master output (PGM) and monitor (CUE) sound. 14. Headphone Level – Adjusts cue volume. 15. Headphone Jacks – Used to connect either 1/8” or 1/4” plugs for audio monitoring with headphones. CD PLAYER FEATURES 1. OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. Tray will automatically close after 30 seconds.

Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. 3. Study this setup diagram. 4. Place mix station in an appropriate position for operation. 5. Make sure all devices are turned off and all faders and gain knobs are set to “zero” 6. Connect all stereo input sources as indicated in the diagram. 7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources. 8. Plug all devices in

By changing the pitch of one disc with respect to the pitch of the other disc, the beats can be matched. 5 12. CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has been reset to t

Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT 3. Study this setup diagram. 4. Place mixer in an appropriate position for operation. 5. Make sure all devices are turned off and all faders are at “zero” 6. Connect all stereo input sources as indicated in the diagram. 7. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio sources. 8. Plug your mixer and other devices into AC power

1. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT 2. Study this setup diagram. 3. Place mixer in an appropriate position for operation. 4. Make sure all devices are turned off and all faders are at “zero” 5. Connect all stereo input sources as indicated in the diagram. 6. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio sources. 7. Plug your mixer and other devices into AC power. 8. Switch everything on in the following order. • audio input sources (i.e. t