Escreva a sua própria avaliação do dispositivo
Baixe o seu
The S1465 nickel cadmium battery pack must be fully dharcpd prior to first use. CAUTION: MAKE SURE THE S14 60 INTERNATIONAL AC ADAPTER/RECHARGER IS CONNECTED TO THE DC IN NOT LAMP ON THE S/SW805A FRONT PANEL ANDTHE POWE R SWITCH IS OFF . The S/SW8 05A recharging system is designed for use with the ArnpliVcx S1465 Ni Cad battery pack only. RibIisted\Diœctions. 5/05 Remove the 10 D size battery holder from the unit ard replace with the S1465 NiCfeid battery pack. When charging for the first ti
Line Out SET UP -INSTALL POWER SUPPLY S1204 Speaker: The Battery Holder is standard and holds 10 D-cell alkaline batteries. Optional Power Supplies may be substituted: Model S1460, International AC Adapter (110/220V, 50/60Hz). Model S1452, 12 Volt DC adapter (automotive cigarette lighter plug- in), Model S1465, NiCad Battery Pack (requires S1460 to recharge). S1670 Transmitter: (Frequency: 169.445MHz) Power with 1 – 9 volt battery or 9Volt AC Adapter (not supplied) S1204 Speaker: Loosen four thu
Optional Power Supplies may be substituted: Model S1460 -International AC Adapter/Recharger (110/220V, 50/60Hz). Model S1462 - 12 Volt DC adapter (automotive cigarette lighter plug-in). Model S1465 - NiCad Battery Pack. TO INSTALL OR REPLACE BATTERIES Remove Reading board. Loosen two wing nuts on battery holder bracket. Remove battery holder from amplifier. Insert (10) new Alkaline “D” cell batteries, be sure to observe polarity, or replace with Model S1465 NiCad battery pack. Carefully replac
Insure connection points are clean and free of corrosion. Model S1460 International AC Adapter (110/220V, 50/60Hz) and battery recharger can also be used. S1465 - NiCad battery pack is also available. TO INSTALL OR REPLACE BATTERIES Remove all plugs from amplifier. Slip a fingernail under battery door on back of amplifier. Remove battery pack from amplifier. Insert 10 new Alkaline “D” cell batteries, observing polarity, or NiCad battery pack. Carefully replace battery pack. Slide battery door
Optional Power Supplies may be substituted. Model S1460, International AC Adapter/Recharger (110/220V, 50/60Hz). Model S1462, 12 Volt DC adapter (automotive cigarette lighter plug-in). S1465 NiCad Battery Pack. TO INSTALL OR REPLACE BATTERIES Remove all plugs from amplifier. Remove amplifier from lectern. Slip fingernail under battery door on back of amplifier and slide out. Remove battery pack from amplifier. Insert 10 new Alkaline “D” cell batteries, be sure to observe polarity, or replace w