Log:

AMX RF Receiver AXR-RF

Downloads : 17 Arquivo Tamanho: 88 kb    Fabricante : AMX  
Categoria : receptor e amplificador

When required for large areas, or multiple-room coverage, multiple receivers can be connected in parallel on the AXlink bus. FIG. 1 AXR-RF RF Receiver AXPPWRAXMGNDDEVICEAXlinkONDATARADIOAXlink rear front Specifications Power Consumption 780 mW; ±12 VDC, 65 mA (max.) Dimensions (HWD) 1.5" x 5.09" x 5.27" (3.81 cm x 12.93 cm x 13.39 cm) Weight 10.56 oz. (299.37 g) Front Panel Components: Radio data LED AXlink LED Red LED lights to indicate the AXR-RF has received an RF signal from an AMX transmitt

AMX TVM-RX03

Downloads : 5 Arquivo Tamanho: 90 kb    Fabricante : AMX  
Categoria : receptor e amplificador

1 TVM-RX03 Endeleo Managed TV Receiver The Cat5, 5e or 6 cable provides audio/video transmission, power for the receiver and a unique bi-directional IR pass-through for controlling displays and video source devices such as DVD players or video recorders connected to the Endeleo Distribution Hub or Receiver. The TVM-RX03 also provides an LED display for channel identification and local IR emitter and RS-232 serial ports for control of LCD/Plasma screens, video projectors and other devices. Fea

AMX RDA-PSM

Downloads : 0 Arquivo Tamanho: 93 kb    Fabricante : AMX  
Categoria : Fonte de alimentação e fonte de alimentação

The power supply module is designed for use with the RDA series of Radia enclosures. The RDA-PSM is used to supply extra power to Radia control cards when the amount of power required to drive the modules exceeds the 300 mA supply on each controller. The module's voltage and current ratings are CE, UL, and C-UL approved. Mounting points Line in (hot) Neutral High-voltage connections Transformer External +12 V power connector (optional) Caution: Pre-Installation Notes All Class 1 wiring

AMX Wall Mount Decor IR Sensor IRX-DM+

Downloads : 2 Arquivo Tamanho: 95 kb    Fabricante : AMX  
Categoria : Outras ferramentas

The IRX-DM+ (FG458-10/11) is in a UniMount enclosure that fits into most US-style single-gang enclosures. The IRX-DM+ works with AMX 38 kHz or 455 kHz IR transmitters. Note: The IRX-SM+ swivel-mount version is also available for wall or ceiling installations. IR Sensor IR Data LED FIG. 1 IRX-DM+ unimount IR sensor IRX-DM+ Specifications Dimensions (HWD): 4.68" x 2.93" x 1.14" (118.70 mm x 74.40 mm x 29.00 mm) 0.30" (7.70 mm) depth from wall surface Available Colors: White (FG458-10) and Black (F

AMX Incandescent Dimmer Module RDM-INC50

Downloads : 3 Arquivo Tamanho: 95 kb    Fabricante : AMX  
Categoria : Iluminação

It can dim incandescent lights, cold-cathode, neon transformers and two-wire dimmable ballasts. It is designed for use with the RDA series of enclosures, in a AMX Lighting™ modular digital dimming system. The RDM-INC50 module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points Line in (hot) Load out • All electrical ratings are for continuous duty. • AC lighting loads only. • For indoor use only. • This module may require extra power from the AXlink connection o

AMX Advanced Classroom Transmitter TXC-ACT

Downloads : 4 Arquivo Tamanho: 105 kb    Fabricante : AMX  
Categoria : Stereo

......... 9 Overview 9 Technical Support ................................ ................................ 11 Overview 11 TXC-ACT Advanced Classroom Transmitter Table of Contents Table of Contents TXC-ACT Advanced Classroom Transmitter Introduction Overview The AMX Synergy TXC-ACT Advanced Classroom Transmitter (Figure 1) offers a full range of control options for AMX Synergy systems. Figure 1 Front view of the TXC-ACT You can control all the equipment in your media head end . VCRs, laserdisc pl

AMX IRX-SM+

Downloads : 4 Arquivo Tamanho: 105 kb    Fabricante : AMX  
Categoria : Outras ferramentas

1) is a remote IR sensor that works with the Axcess AXC-RCVI card, AMX Television Managers, and MX8 / MX16 Relay Receivers to remotely control IR devices. The IRX-DM+ (FG455-01) is in a swivel-mount enclosure for use in wall or ceiling installations. The IRX-SM+ works with AMX 38 kHz or 455 kHz IR transmitters. Note: The IRX-DM+ UniMount version is also available for US-style single-gang enclosure installations. Swivel mount bracket Housing Circuit assembly board IR Data LED IR Sensor FIG. 1 IRX

AMX DAS-AMP8

Downloads : 13 Arquivo Tamanho: 107 kb    Fabricante : AMX  
Categoria : receptor e amplificador

3 SWT pinout configuration Connecting SWT Speakers Wiring Diagram - Expanded Configuration Matrix Audio SWT Speakers are different from any other speaker available on the market. They allow you to control a single zone of audio without a keypad being installed. Therefore, some different wiring practices must be considered for proper operation and control. This is achieved by “daisy-chaining” from the first speaker to the second speaker. The main run of 16/4 from the controller will go directly t

AMX DAS-IAMP4

Downloads : 1 Arquivo Tamanho: 107 kb    Fabricante : AMX  
Categoria : receptor e amplificador

FIG. 1 DAS-AMP4/8 amplifiers •The DAS-AMP4 is a 4-channel amp that provides 2 speaker pairs per unit. •The DAS-AMP8 is an 8-channel amp that supports an additional 4 speaker pairs per unit. Features • High-quality sound - delivers 60 watts of high-quality sound per channel. • Expandable - stack up to three Carbon XA amplifiers units per zone to allow up to 12 speaker pairs (24 channels) in a single zone. • Easy installation - SWT (Speaker Wire Technology) makes installation simple using four-con

AMX DAS-IAMP8

Downloads : 6 Arquivo Tamanho: 107 kb    Fabricante : AMX  
Categoria : receptor e amplificador

The main run of 16/4 from the controller will go directly to the first speaker in the zone. • At the controller end, the wiring is left-to-right: L D G R. • At the speaker end, refer to the labeling on speaker PCB to ensure the correct wiring. The labelling at both ends must match or the IR control will not work (i.e.: if you used the RED wire for the Left Audio labelled “L” at the zone output, you must use the RED wire for the pin labelled “L” on the speaker connector). Note: Be sure to screw t





categorias