This consists of turning the grill on high for a 15 20minuteperiod. Allowthegrilltocoolcompletely,removethe FlavorScreenandflipitoverthattheheavybuild-upsideisdown or brush it with a soft bristled brush (paint brush or BBQ brush). do not uSe a StiFF or wire briStled bruSh or cleaning SolutionS. the uSe oF theSe iteMS will void the warranty. Alternate Cleaning Methods The Flavor Screen may be placed in your self cleaning oven and subjected to a “clean” cycle. TheFlavor Screenmay be gentlyrinsed w

B100617-3-0710 Page 1 Installation The Broilmaster® Flavor Screen is designed as an alternative to briquettes in your grill. To install the Flavor Screen, simply: 1. If installed remove cooking grids 2. Remove the briquettes from the grill. 3. Flavor Screen Placement P3 Grills • PlacetheFlavorScreenonthebriquetterackor • RemovethebriquetterackandplacetheFlavor Screen on grill body. • On P3F grills, the flavor screen willbe placed ongrill body (no briquette rack is needed) P4 Grills • The Flavor

Page 4 B101074-0-1006 B101074-0-1006 Page 5 All repair part orders should be placed through your local Broilmaster dealer. To locate a dealer in your area, contact Broilmaster Customer Service at 800-851-3153. To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number, Part Name, Part Number, and Quantity of parts needed. REMOVE PROTECTIVE COATING FROM STAINLESS STEEL PARTS STARTING AT POP RIVETS AND VERIFY THAT ALL PARTS LISTED

CAUTION: OPERATION OF A PROPANE GAS GRILL AND SIDE BURNER WITHOUT THE PRESSURE REGULATOR AND HOSE ASSEMBLY WILL CAUSE GAS LEAKS WHICH COULD LEAD TO FIRE OR EXPLOSION, RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY. The pressure regulator’s fitting must remain clean and free of nicks and scratches. A dirty, nicked or scratched fitting can cause a gas leak, resulting in an explosion or fire. Use only genuine Broilmaster® replacement parts unless otherwise specified by the manufacturer. Pressure R

FIGURE 5 Shelf Kit Page 7 Pull Handle Pull Handle FIGURE 6 Place two bolts (20) into holes in pull handle (19) and through holes on left or right side of grill bottom. Fasten each bolt with a washer (21), lock washer (22), and nut (23). FIGURE 6. Repeat procedure for the right side. Part Description Qty. SKPH Part No. Handle Shelf Stainless Bracket 1 B073100 Bolt 1/4-20 x 1/2 Hex Head Stainless Steel 2 B076330 1/4-20 Hex Nut Stainless Steel 2 B076331 9/32 ID x 5/8 00 Flat Washer Stainless 2 B076

B100004-0-0102 IMPORTANT INFORMATION IMPORTANT INFORMATION CONGRATULATIONS! You have chosen the finest accessory for your outdoor cooking pleasure. Please take time to read this entire manual before installing your premium Broilmaster® Shelf Kit. C22 Parts Diagram...............................................................................................................................3 Parts List ................................................................................................

Slide each stainless steel side shelf (8) onto the grill pull handle. Secure with one 1/4-20 screw (9). FIGURE 2. FIGURE 1 3 9 FIGURE 2 13 15 14 14 FIGURE 3 SIDE VIEW 10 8 9 PULL HANDLE PULL HANDLE PARTS LIST — FRONT SHELF PARTS LIST — FRONT SHELF All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your area, contact Broilmaster Customer Service at 800-851-3153 • WWW.broilmaster.com. To ensure prompt and accurate service, please provide the follo

7 Pull Handle ...................................................................................................................................... 8 IMPORTANT: THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE SHELF KIT AND ALL PERSONS WHO WILL USE AND MAINTAIN THE SHELF KIT. THE INSTALLER SHOULD BE SURE THE MANUAL IS LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE WHEN USING OR CLEANING THE SHELF KIT AND TO PROPERLY IDENTIFY ANY REP

Please take time to read this entire manual before installing your premium Broilmaster® Shelf Kit. C22 Parts Diagram...............................................................................................................................3 Parts List .................................................................................................................................... .4 Side Shelf Installation.....................................................................................

If any parts are missing contact your Broilmaster® dealer before beginning assembly. CAUTION: PARTS MAY HAVE SHARP EDGES. WEAR LEATHER WORK GLOVES AND HANDLE PARTS CAREFULLY DURING THE UNPACKING, ASSEMBLY AND THE INSTALLATION. Tools Required These tools are required for the assembly of your shelf kit: • Phillips screwdriver • Socket set or nut drivers Page 2 Shelf Kit PARTS DIAGRAM PARTS DIAGRAM Shelf Kit Page 3 PARTS LIST — SIDE SHELF PARTS LIST — SIDE SHELF All repair part orders should be pla