It is attached to the left rear dropout (the non-chainring side) of your bicycle. 1. Remove the quick release lever assembly from your bike and set it aside. 2. Line up the hole on the flat side of the hitch upper arm with the left rear dropout hole. 3. Reassemble the quick release assembly through the hitch and dropout, but don’t tighten it yet. 4. Slide the hitch receiver end of the tongue between the two hitch side arms, and line up the holes. The hitch should clear any racks, bags, or f

If you have any questions about using your QR axle, please consult your bicycle manual or Burley dealer. Install the standard hitch (included with your Burley trailer) onto the Adapter and secure with the provided nut. Tighten to 20 N-m (15 ft-lb). It may be necessary to grip the knurled portion of the Adapter with pliers while tightening the nut. Refer to your Burley trailer manual for information on using your Burley hitch. Solid Axle Adapter Installation Remove non-drive (left) side axle

The Adapter replaces your non-drive (left) side axle nut and allows the hitch to be installed without interfering with the dropout. Burley offers the Alt Adapter in several configurations; check with your authorized Burley dealer to ensure that you choose the proper configuration for your bicycle. Warning! Burley has engineered its hitches and adapters exclusively for use with Burley trailers. Use of any Burley hitch or adapter on a non-Burley trailer may result in an accident and serious inju

' K2 Bike 2003 Derailleur Hanger Finder RK0 10 RKQ13 59 124 14492* 00, Zed SE 00, Zed V 00, Zed X 00, Aggro HT 00, Razorback HT 99, Razorback HT 99, Zed V 99, Zed X 99, Zed M 98, HT 200 98, HT 300 97, World Cup 96, World Cup 95, World Cup 'The hanger 14492 can also be used on the 98 HT 300 K2 Bike is a wdrld Leader in the design, Marketing and sales df high quality BIKES AND ACCESSORIES FDR ROAD, MOUNTAIN AND BMX USE. ^i«c # ÉÉ I

^i«c # ÉÉ I

' K2 Bike 2003 Derailleur Hanger Finder RK0 10 RKQ13 59 124 14492* 00, Zed SE 00, Zed V 00, Zed X 00, Aggro HT 00, Razorback HT 99, Razorback HT 99, Zed V 99, Zed X 99, Zed M 98, HT 200 98, HT 300 97, World Cup 96, World Cup 95, World Cup 'The hanger 14492 can also be used on the 98 HT 300 K2 Bike is a wdrld Leader in the design, Marketing and sales df high quality BIKES AND ACCESSORIES FDR ROAD, MOUNTAIN AND BMX USE. ^i«c # ÉÉ I

^i«c # ÉÉ I

^i«c # ÉÉ I

Figure 2 b. Remove shoulder bolt, lock nut and washer from flex connector in end of tow bar, and disconnect trailer tow bar from hitch. Figure 2 2. Remove bolt, safety strap, lock nut and D-ring/clip from tow bar. 3. Replace old flex connector with new connector, aligning hole in connector with hole in tow bar. 4. From above, re-install bolt through tow bar, safety strap grommet and D-ring/ clip, and securely tighten lock nut. 5. To connect tow bar to Classic Hitch, slide new flex connector betw

950037 Contents: (1) Hitch connector for round tow bar (1) Lock nut (1) Safety strap assembly (1) Bolt (2) D-ring/clip 950038 Contents: (1) Hitch connector for square tow bar (1) Lock nut (1) Safety strap assembly (1) Bolt (2) D-ring/clip For use with Burley standard and forged metal hitches 1. Remove trailer from bicycle. 2. Remove existing bolt, safety strap, lock nut and D-ring/clip from flex connector which is located at the end of tow bar. Figure 1 3. Remove old flex connector from end of t