POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. SAFETY WARNING Although your appliance is easy to operate, for your safety, the below warnings must be followed: 1. Do

8. Use the humidity output regulator control knob to adjust the intensity of the vapor output. Turning the knob clockwise will increase the moisture output, turning the knob counterclockwise with reduce the moisture output. (see Fig. 10) Fig. 10 9. When the humidifier runs out of water the power light will turn red, and the mist output will stop. This is a safety feature to prevent the humidifier from possibly over heating and damaging the nebulizer. This safety feature uses a water level sensor

Specifications, Contents of Packaging P.4 Before First Use, How to Assemble, How to Operate P.5 Maintenance, Service Center P.6 Warranty Information PN Warranty Card P.8 1 A IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should also be observed, including the following. PLEASE READ AND SAVE ALL INSTRUCTION BEFORE USING THE TOWER FAN. 1. Always turn the fan off before removing the plug from the outlet. NEVER PLUG OR UNPLUG UNIT WITH WET HANDS.

The support battery is protected by a plastic strip. The plastic strip must be removed to activate the batteries. • The battery compartment for the support batteries is located at the bottom base of the humidifiers. TO REPLACE SUPPORT BATTERIES NOTE: Replacement LR1130/1.5V batteries can be purchased at any local drugstore. 1. Press the battery compartment tab and lift the compartment lid. Remove the three LR1130/1.5V batteries 2. Insert three LR1130/1.5V batteries into the battery compartm

DO NOT IMMERSE WATER BASIN IN WATER. 3. Wipe all exteriors surfaces of the base with a soft, dry cloth. Do not immerse the base in water or use water to clean the base. An electric shock may result or the humidifier may be damaged. NOTE: It is recommended to clean humidifier with water and bleach solution as stated above after using the humidifier the fourth time. GENERAL MAINTENANCE AND CLEANING Before any cleaning operation, switch the humidifier off and unplug it. 1. Always unplug the unit be

1 Fig. 2 (Top of Water Tank) 7. Vapor Outlet Channel 8. Water Tank Handle (shape of Tank depends on model #) Fig. 2 Fig. 3 (Water Basin) 9. Nebulizer 10. Vaporization Chamber 11. Fan Vent 12. Valve Opener 13. Water Level Sensor Fig. 3 Fig. 4 (Bottom of Water Tank) 14. Water Tank Valve 15. Water Tank Cap 16. Vapor outlet channel Fig. 4 Fig. 5 (Water Tank Lid) 17. Water Tank Lid 18. Vapor Output Slots (shape of Water Tank Lid depends on model #) Fig. 5 TECHNICAL SPECIFICATIONS: Rating Voltage 120V

Any instructions or warranties included in this manual may be subject to change without notice. For the most up-to-date instructions and warranty information, please contact us or visit our website: NOTE: Spare Parts can also be purchased online at under customer service, order spare parts. Please read limited Warranty conditions mentioned in this instruction manual! Please print clearly and fill in details below. Send Warranty Card with product and dated purchase receipt or copy of receipt.

Keep the cord away from heated surfaces and areas where it could be walked on or tripped over. Unplug the unit when not in use and whenever you clean or move the unit. 9. Do not add medication of any type into the Water Basin or Water Tank. Do not cover any openings on the unit or insert objects into any openings. 10. The unit should not be left unattended in a closed room as the air could become saturated and leave condensation on walls or furniture. Leave room door partly open when humidifie

Use cool tap water. DO NOT add any medication or other additives to the water. DO NOT pour water into Mist Outlet Channel. 4. Replace the Water Tank Cap by aligning the threads on the Water Tank with the threads on the Cap and turning it clockwise. 5. Turn the Water Tank over and place the full Water Tank on the Central Body, making sure it fits perfectly. Place the Water Tank Cap with Mist Output Slots on top of the Water Tank. Note: Do not attempt to move the humidifier while Water Tank i

Store the humidifier in a cool dry place. 8 Water Level Sensor To clean the water level sensor unscrew or snap off, depending on style, the plastic cap from the pin. Remove the water level sensor float and clean by wiping the parts with a soft damp cloth. Replace the parts by first putting the water float onto the pin and rescrewing the plastic cap onto pin. TROUBLE SHOOTING CAUTION: DO NOT attempt to repair the motor or nebulizer yourself. If the humidifier continues to not operate please