Outstanding stability and comfort are its built in features. The simple installation and operation, user-friendly three-dimensional OSD, highest quality audio output with Dolby Digital Audio, and advanced video clarity made for TV and VCR are all designed to enrich the viewer experience. In addition to delivering more channels with its new highly sensitive tuner, PVR-8000T boasts the Electronic Program Guide (EPG), for even better program information on all channels, and information plate that

999 channels receivable Memory RAM is 64MB Dolby Digital Audio Output 1 Smart Card slot Quick Setup (Plug-n-Play Installation) Software Upgrade via OTA & serial connection (RS-232C) Supports MyEPG & user friendly information plate 10 OSD Languages including Italian, English, German, etc. Extended information shows the full program information Speedy channel change Detailed program synopsis Favorite channel feature Feature & Function • DJ3 ' MPEG 2 DIGITAL m p . irdGlo * n«rt»*\/Kan

• • Specification Power Supply (internal) Processor Input Voltage AC 90 ~ 250V 60/50Hz CPU ARM920T processor, 250 MHz CPU Tuner and Demodulator for NTSC and FAT Memory Channel Standard NTSC signal FLASH 16 Mbyte FAT ITU-TJ.83 Annex B SDRAM for System 64 Mbyte (128Mbyte) (OpenCable DVS 031 standard) SDRAM for MPEG & Graphic Input Frequency NTSC 54 ~ 552 MHz EEPROM 128 kbit (256kbit) FAT 54 ~ 864 MHz Signal Level -15 ~ +15 dBmV @ 256 QAM RF-Loop through -15 ~ +15 dBmV @ 6

Bracket Кронштейн Floor Пол Tapping screws (not supplied) Самонарезающие винты (не поставляются) Fixing screws—M4 x 8 mm Затяжные винты—M4 x 8 мм Installing the antenna Before installing: • The diversity antenna supplied with this unit is designed specifically for use with JVC TV tuner unit. (It cannot be connected to the car radio.) • Do not rub the antenna or the antenna’s cable with alcohol, benzine, thinner, gasoline or other volatile substances. • Attach to the inside of the car window gla

999 channels receivable Memory RAM is 64MB Dolby Digital Audio Output 2 Scarts 1 Smart Card Quick Setup (Plug-n-Play Installation) V.90 Modem Software Upgrade via OTA & serial connection(RS-232) Supports MyEPG & user friendly information plate 10 OSD Languages including Italian, English, German, etc Extended information shows the full program information Speedy channel change Detailed program synopsis Favorite channel feature 4 Buttons & 3 LED display HUMAX EASY DIGITAL / DTT-3600 Digita

Where we do have a few gripes with the UK’s first combined -RW and RAM recorder is its connections, which include a RGB enabled Scart and separate S- Video and stereo audio outputs. However, the second Scart at the back of the unit, which connects set-top boxes, cannot handle RGB sources – it will only accept composite or S-Video sources. An i.Link terminal on front panel allows digital dubbing from camcorders. Its ‘living memory playback’ feature – watching a recording while it’s still being ma

What a shame it has no RGB input for recording digital TV sources. We say: By no means a bad DVD recorder at Humax’s first attempt. Quite easy to use and fine for recording analogue terrestrial TV but, sadly, not digital. Its eye-catching design, complemented by a stylishly thin remote control, is let down by a sluggish menu system and, above all, the price. A good unit but other recorders offer just as much for the money. A sizeable drop in price may be needed if Humax is to keep up with its ri

7. No PIN-Code information is given. • The default PIN-Code is always 0000. • The default PIN-Code is 1234 for Parental Control. (IR-ACE II UBI only) • The default PIN-Code is 8272 for Channel List and Installation. (IR-ACE II UBI only) 8. Channel search does not work. • Make sure that the antenna setting in the menu is correct. 9. Cannot update new software. • You can get an update. If the product does not show a message requesting update, that means no software is available. 10.Cannot watch sc

Select Installation and press the OK button. 3. Select Status and press the OK button. STB Status You can confirm the information of the STB. Signal Detection You can display the percentage of signal strength and quality. Humax SW Update You can update software automatically or manually. When completing the software update, the product is automatically powered off and again. Note: To perform software update, you will be prompted to enter your PIN-Code. Enter the PIN-Code using the NUMERIC(0~9) b

• Package contents may vary according to area. • The front and rear of the product are subject to change without notice. . . . ". . 1. STANDBY LED Red light is emitted when the product is in standby mode. 2. STANDBY BUTTON Switches between operation and standby modes. 3. VOL BUTTON Display the volume bar. 4. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down. 5. TV LED Green light is emitted when the product is in TV mode. 6. RADIO LED Amber light is emitted when the p