Use of such substances will cause hazards and could cause damage to the unit. If you plan to pop more corn, allow the Popcorn Factory to cool for at least 10 minutes. Remove any unpopped corn left in the popping chamber using oven mitts to lift the cover off the base, turn base upside down to remove unpopped corn. Do not place hands inside the popping chamber as it becomes very hot during operation. Replace the cover and start again. CAUTION. Do not operate the Popcorn Factory in excess of 5 min

Ensure that the power source to be used is the same as the voltage requirements of the product. Always switch the appliance to off, switch the power off at the power outlet and then unplug from the outlet when the appliance is not being used and before cleaning. Never immerse the power cord, plug or blender body in any form of liquid. Always place the appliance on a dry, level surface when in use. Ensure the blender lid is securely in place before operating. Do not remove blender jug from the mo

If cleaning of the timer is required, remove from mains power and wipe timer with a dry cloth. DO NOT IMMERSE TIMER IN WATER OR ANY OTHER LIQUID. Heaters and similar appliances should never be left unattended during operation.The manufacturer recommends such appliances not be connected to timers. Extreme caution and supervision is necessary when this appliance is used by or near children invalids or animals. Young children should be supervised to ensure they do not play with the appliance.

rates were tested and verified by an We trust that you will enjoy the benefits independent Australian laboratory. of healthy, clear, great tasting water using We recommend using the Kambrook your Kambrook filtration carafe. water filter only with municipally treated Making great tasting drinking water is easy tap water or with bore or tank water that with your Kambrook Aquarius Filter has been tested to be microbiologically Carafe plus you can save money on safe. purchasing expensive bottle wate

Place the heating base on a flat, dry surface. Insert the melting pot into the recess of the heating base. Pre-heat the appliance for 10 minutes by inserting the power plug into power outlet, switching on at the power outlet and turning the selector control to Setting 2 for 10 minutes. (The Power Indicator Light will illuminate on Settings 1 and 2). Place the chocolate to be melted into the preheated melting pot and stir regularly during the melting process. Melting time will vary with the amoun

Ensure that the power source to be used is the same as the voltage requirements of the product. Always attach temperature control probe to the appliance first before connecting to power source. Unplug from power outlet when not in use.Always remove cord from appliance before moving. Place the appliance on a dry, level surface. Do not leave appliance where children can touch hot surfaces. Do not touch hot surfaces. Use handles for lifting and carrying the appliance and knob for lifting lid. Avoid

Hour : set 3. Snooze: alarm repetition 4. Sleep: On / set 5. Alarm : set / stop 6. Time : set 7. Volume Control 8. Turning Knob 9. Function Selector 10. Band Selector:AM / FM 11. Dual Alarm Controller 12. AC Power cord 13. Battery back-up compartment 14. Alarm On indicator 15. Digital display 16. FM Wire Antenna 11131 31646128109752 1514 POWER SUPPLY AC power: 230-240 Volt, 50Hz DC power: 9 Volt battery type (not provided) for clock back-up system only. An alkaline type battery is recommended. F

An alkaline type battery is recommended. For optimum performance, this battery should be replaced every 6 months 1. Insert the AC power cord (12) into a convenient AC power outlet. Ensure the switch on the power outlet is in the off position, plug in the power cord, and then switch on at the AC power outlet. 2. Connect the 9V battery inside the compartment at the bottom of the unit (9). Back-up system: Ensures that the unit will continue to operate as normal during an AC power disruption (in ord

Large Snooze button 151146 17161311 DC power: 9 Volt battery type (not 2. Tuning indicator provided) for clock back up system only. An alkaline battery type is recommended. 3. Tuning dial For optimum performance, this battery 4. Tuning adjustment should be replaced every 6 months. 5. AM/FM switch Insert the AC power cord (10) into a 6. Volume control convenient AC power outlet. Ensure the 7. Blue LED display switch is in the off position, plug in the power cord and then switch on at the 8. Auto-